MMKB

When making edits to long standing statements or facts on the wiki, you MUST PROVIDE CREDIBLE SOURCES FOR YOUR CLAIMS. edits done without will be UNDONE, NO REASONS GIVEN. Please use the talk pages to provide these sources before editing!

READ MORE

MMKB
MMKB
Advertisement

Z-Saber (ゼットセイバー Zetto Seibā), also written as Z Saber and Z-Sabre,[1] is Zero's main weapon in the Mega Man X and Mega Man Zero series. It is a powerful saber with a green energy blade (blue in some artworks). Zero received the weapon in Mega Man X2 after he was remodeled by Serges, and it has appeared in every chronological game since.

Mega Man X series[]

Mega Man X games[]

In Mega Man X2 and Mega Man X3, this weapon is known as the Beam Saber (ビームサーベル Bīmu Sāberu, sometimes Beam Sabre). In Mega Man X2, Zero uses it in his Dash Attack and finishes his Z-Buster Charge Shot combo by slashing it to emit a shockwave. In Mega Man X3, Zero can slash the Beam Saber while glowing green after performing a Double Charge Shot. When not used, Zero stores the deactivated saber hilt in a special sheath-like element located on his back (where in canon artwork barring his ambidextrous sprites, Zero has the sheath behind his left shoulder).

The Z-Saber was expanded on in Mega Man X4, as Zero wields the Z-Saber entirely without his Z-Buster. He can use it on the ground, in the air, or on a wall, though attacking on the ground forces him to stand still. His default combo in Mega Man X4 to X5 is a downward slash-to-outward slash done via his following arm then a forward-leaning downward two-handed chop that does three hits (while in Mega Man Xtreme and Mega Man Xtreme 2 he inflicts a one-handed inward slash slightly upward instead). The crouching attack is an inward sweeping slash while the midair slash is an outward swing angled a bit downward (which changes its animation slightly when done as he lands). This in X6 changes to an inward cut, downward-outward cut then a two-handed launching-lift slash to the background (which inflicts 3 hits; both the first and third inputs are akin to his Xtreme games' neutral combo finisher); the crouching slash changes into an outward sweeping-slash, and the midair slash is a midair version of his original downward 3-hit slash (which resembles an altered version of it when performed as he lands). Zero performs most of his techniques with the Z-Saber, his most recurring techniques being a rising slash, a downward stab, a dashing thrust or slash, and a rolling slash.

Similar to the Special Weapons, Zero can use the Z-Saber to execute techniques that he learned and adapted from enemy Mavericks. The techniques obtained from defeated bosses usually are assigned to different elements, such as fire, ice, and lightning, and those attacks are executed by fulfilling certain button combinations while being in a certain situation (for example, being in mid-air).

X4 zerostand

Zero with the Z-Saber in Mega Man X4

The Z-Saber used until Mega Man X5 had a rather fluid-formed blade, sweeping through the air and less like a solid due to its irregular energy flow. X uses this fluid Z-Saber throughout Mega Man X6, while Zero gains a new Z-Saber upon his resurrection with a more solid energy blade. In Mega Man X7 and Mega Man X8, he keeps the saber out and activated as long as it is equipped (in the case of Mega Man X8, Zero has the sheath over his right shoulder in gameplay).

In Mega Man X: Command Mission, Zero can use several types of swords besides the Z-Saber, all of which are Combat type weapons that hit a single target. The Z-Saber is Zero's initial weapon, a beam saber that he uses to attack with a Double Slash combo. As the game progresses, Zero has access to better versions of the weapon, the Z Saber+, Z Saber++, and Z Saber+++.

Use by X[]

Mmx03

X wielding the Z-Saber in Mega Man X6.

X can also use the Beam Saber, usually as easter eggs or in certain circumstances. In Mega Man X3, in order to obtain it, Zero must pass through the one boss door that he can enter in the entire game. It's found on the second stage of Dr. Doppler's fortress, and is the first door in the stage. It leads to the sub-boss Mosquitus. Defeating the sub-boss with Zero will cause him to be severely injured by its explosion. Zero will then pass the Beam Saber to X before teleporting out to Dr. Cain's lab for repairs, becoming unavailable afterwards. Of course, losing Zero results in the "bad" ending. To use the Beam Saber, X must fully charge his buster beyond the pink charge level into the fourth green charge level, where he will then draw it from his back and fires off a slashing arc of green energy, where upon impact, the target is swarmed with cutting blows. The attack does optimal damage and is considered the game's ultimate weapon.

The fluid-shaped Z-Saber is found by X in the end of Mega Man X5 and used by him in Mega Man X6 by pressing the Special Weapon button without one equipped. The Z-Saber's purpose in X6 allows X to destroy obstacles and enemies that cannot be done otherwise with the X Buster, or inflict damage in a more tactical manner. As not being as experienced with the Z-Saber as Zero, X has a rather slow recovery time from slashing as he uses Zero's original third-input slash on the ground (while still using his original horizontal slash in midair). His armors in X6 are also more geared towards utilizing the Z-Saber, with the Blade Armor allowing him to adapt it into his buster and empower it, while the Shadow Armor has him use it with ninja like tactics due to its attack set.

In the X Challenge, if X opts to take no special weapons, the Z-Saber will change to its purple color, though this change is purely aesthetic. Additionally, if X can't use any of his special weapons, the Z-Saber will count as one when fighting against High Max. An added bonus to the Z-Saber is that bosses cannot guard against its attacks, and can be used to pierce through bosses like Neon Tiger and Colonel.

It's unknown what happened to the original Z-Saber after Zero reappeared following the destruction of the Zero Nightmare, though since X was in possession of said saber throughout the game, he may have kept it.

While not seen being used by X again in the main games, the Z-Saber is used by X's Blade Armor version in Bouken Dig Dig 2, and in Ultimate Marvel vs. Capcom 3, Zero has a skin that models him after X, making him look like X with Zero's moveset, including the Z-Saber.

Other appearances[]

Zero appeared with the Z-Saber in most of his appearances in other games.

In Tatsunoko vs. Capcom and Marvel vs. Capcom 3, Zero uses the fluid Z-Saber version from Mega Man X2 to X5. He also reuses the whole standard saber slash attack set as follows from X4-to-X5: default neutral combo is his standing light, medium and heavy respectively, crouching medium is his crouching slash and jumping medium is his midair slash; however these animations are all altered perspective-wise due to Zero unsheathing the Z-Saber from his leading shoulder instead of his following shoulder like in the 2D games (while canonically and in artworks as aforementioned, behind his left shoulder is where he holsters the saber when inactive).

In Marvel vs. Capcom: Infinite, Zero's moveset with the Z-Saber is altered; especially via a new command normal by the name of Koketsuga (弧抉牙, lit. Arc Gouge Fang), where it is Zero's original crouching heavy attack (where he rolls along the ground at an angle to sweep-slash at his foe's feet). In both Marvel vs. Capcom 3 and Marvel vs. Capcom: Infinite, there is a midair version of the attack that acts as Zero's primary air combo/aerial rave finisher (jumping S in the former and jumping HK in the latter).

A Long Sword with the appearance of the Z-Saber appeared as an event weapon in Monster Hunter Explore. It is able to release Genmu Zero waves.

Z-Saber appeared as an event weapon in Elemental Story.

Z-Saber appeared as an Action Card in TEPPEN.

Mega Man Zero series[]

The Z Saber is one of the Ten Shining Weapons, and like Zero, its whereabouts had been unknown until the Cyber-elf X gave it to Zero in the beginning of the first Mega Man Zero game. After Mega Man Zero (despite being in all concept and promotional art for the first game), the Z Saber has been redesigned and reconfigured along with Zero himself, now possessing a triangle-shaped blade. Furthermore, the Z Saber received a few more upgrades. Unlike in the X series, the Z Saber now can be used while moving (however, no combos can be performed while in motion) and can even be charged for a smash-like attack due to the X-Buster technology embedded into the saber. The Z Saber is also customizable, allowing the Resistance member Cerveau to make it the basis of the rest of Zero's arsenal in the series by adjusting the saber's safety valve, allowing Zero to freely compress and shape the blade according to his needs.[2] The exceptions are the Buster Shot (which is still combined with the Z Saber as source for its energy ammunition) and the Zero Knuckle. Some Mega Man Zero series sources, such as Recoil Rod's artwork, indicate that in this series Zero actually uses at least two Z Sabers. According to concept arts, the Z Saber(s) is/are stored within the holsters located on Zero's hips. The Z Saber can be equipped with different chips for element-based charge attacks.

The weapon's most interesting characteristic is the sheer amount of force it can dole out to enemies; it is able to easily slice through 300 mm of reinforced steel in a single stroke. The Z Saber is also unique in the fact that it apparently doesn't require an energy source to operate. In Mega Man Zero 2, Zero spends around a year far away from any energy source and the Z Saber is still in full operating condition; though, knowing that Zero has an internal reactor, it is possible that the saber can be recharged by drawing energy from Zero himself.

In the first two games, Zero has to "relearn" his skill with the Z Saber, upgrading its attack power and moveset by frequently using it against enemies, thus leveling it up. In the first game, Zero can also learn two rolling slash attacks by defeating several enemies with the Z Saber while jumping or dashing. The rolling slashes aren't learned in Mega Man Zero 2, but they are still available by using the Active Form. In the second game, the skill level will not increase during the first mission in the Sand Wilderness, only after Zero is repaired in the New Resistance Base.

In-game, the saber is excellent for high close-range damage, being able to eliminate most basic enemies with a single slash. It also tends to have multiple EX Skills, and in MMZ3 and MMZ4, has much more potential than other weapons in terms of Hit Priority combos. However, it is still a close-range weapon, and can cost the player some health if they use it recklessly.

Image Level Upgrade Description
1
★1 - Zero can perform a single slash while standing, walking, dashing, jumping or sliding down a wall. By pressing down while holding the attack button in the air, Zero holds the Z Saber while falling.
2
★2 40 hits (MMZ)
30 hits (MMZ2)
Zero can perform a double slash.
3
★3 160 hits (MMZ)
90 hits (MMZ2)
Zero can perform a triple slash.
Charge
★4 560 hits (MMZ)
290 hits (MMZ2)
Zero can charge his slash.
Charge
★5 1680 hits (MMZ)
850 hits (MMZ2)
The Z Saber charges faster.
Jump
★+ 100 hits with jumping slash. (MMZ only) Zero can perform a rolling slash while jumping.
Dash
★+ 60 hits with dashing slash. (MMZ only) Zero can perform a rolling slash while dashing.

Starting in Mega Man Zero 3, the Z-Saber undergoes some large changes. Firstly, its sprites are redrawn to better reflect its triangular shape from official artwork. The skill system is also removed, as Zero begins the games capable of using the triple-slash combo and charging the Z-Saber. He can also use other saber enhancements by using Hacker Cyber-elves in Zero 3, and Body Chips in Zero 4.

MMZ ZSaber Sprite Difference

The Z-Saber in Mega Man Zero 2 compared to the Z-Saber in Mega Man Zero 3.

In Mega Man Zero 3, Zero can use the jumping and dashing rolling slashes by using the Cyber-elf Malthas. He can also use an upward slash like the Shoenzan by using the Cyber-elf Lizetus, and release a shockwave similar to Kougenjin by using the Cyber-elf Cottus. The Cyber-elf Ilethas allows Zero to stop some energy shots by slashing them. The Z Saber can be powered by using the Cyber-elf Sabras and the Mod Cards 4, 40, and 79.

In Mega Man Zero 4, the Body Chip Rolling allows Zero to use the rolling slashes, the Body Chip Erase allows him to stop some energy shots with the Z Saber, and the Body Chip Reflect reflects the shots back to the enemy.

Zero also uses the Z Saber in SNK vs. Capcom: SVC Chaos and Onimusha Blade Warriors.

Mega Man ZX series[]

The Model Z Mega Man has a Z Saber as the main weapon. The series also contains the similar ZX Saber from Model ZX and OX Saber from Model OX.

Mega Man Legends series[]

The Zetsabre is one of the items needed to create the Blade Arm in Mega Man Legends and Mega Man Legends 2.

In the first game it is a toy sword, its description from the Japanese version saying that it is from an anime called "Rockman Zero". It can be obtained by winning the Beast Hunter mini-game from Kattelox Island's TV station with a high rank.

In the second game the mayor from Pokte Village says that the Zetsabre is a legendary shining sword that was used by a hero who saved the village long ago and was handed down in her family over the years. Mega Man Volnutt can either buy it for two million Zenny or gain it as a prize for answering all 100 questions from her quiz correctly.

Mega Man Battle Network series[]

Z Saber
Main article: Z-Saber (Battle Chip)

The Mega Man Battle Network series has two Z-Sabers that appeared as Battle Chips, one from the Zero virus and the other being Zero's Z Saber (misnamed as Z Saver in the games) from the Mega Man Zero series.

Other appearances[]

Rockman X DiVE Standard Saber

Standard Saber in Mega Man X DiVE

TriangularSaber

Triangular Saber in in Mega Man X DiVE

  • The OVER-Z armor from Rockman Xover is based on Zero and carries a large sword.
  • In the cancelled game Rockman Online, each Zero type Reploid is equipped with a Z-Saber.
  • Z-Saber appears in Mega Man X DiVE whenever a version of Zero uses an active skill with his saber. Additionally, the Z-Saber is also featured as the melee weapon Standard Saber, known as Normal Saber (ノーマルセイバー Nōmaru Seibā) in Japan, that can be used by any Hunter Program.
    • ZX Saber also appears in Mega Man X DiVE whenever Aile uses an active skill with her saber while in her Model ZX form. Additionally, a modified ZX Saber is also featured as a melee weapon as Triangular Saber, known as ZX Saber (ZXセイバー ZX Seibā) in Japan. The Triangular Saber's grip is also used for the Ramen Great Sword, a feature weapon during the collaboration event with Baby Star Ramen.

Other media[]

See also: Z-Saber (Battle Chip)

The Z-Saber appeared in most media featuring Zero, including the Rockman X manga, the Rockman Zero manga and the Rockman X Mega Mission cards. During the Rockman X manga, the saber is remarkably powerful but light, capable of bisecting Mac even before realizing he had been cut in half. In the X3 manga, Blast Hornet temporarily wields the blade and is overwhelmed by the saber's output. After Zero is injured fighting the Nightmare Police, he leaves his saber to be acquired by X during his final attack on Doppler's fortress. Like with the Third Armor, X leaves the Z-Saber behind before disappearing for two months.

In the Archie Comics, the Z-Saber is given a light nod in issue 40 of the Mega Man comic's "Dawn of X" storyline, when Zero uses Sigma's saber to help take down the Wily Walker. Sigma comments that Zero should consider getting a saber of his own some day. Zero eventually obtained his own saber and uses it during Worlds Unite.

Trivia[]

  • The Z-Saber despite being a laser blade-type weapon, has exhibited a normal slashing sound upon contact with its victims; games such as SVC Chaos, Tatsunoko vs. Capcom, Marvel vs. Capcom 3 and Marvel vs. Capcom: Infinite have made it evident in that the Z-Saber seems to cut akin to a normal bladed-weapon upon striking an opponent with it.
    • However, the Mega Man Zero series treats it as a laser blade-type weapons, with most enemies and bosses having a different death animation if destroyed with the Z-Saber. These sprites show the enemies cut in half with a glowing red outline, indicating the weapon cuts with heat.
  • In Mega Man X2 and X3, the pommel of the Z-Saber is nearly visually identical to Sigma's own beam saber, and it only became visually distinct in Mega Man X4. It is possible that in Mega Man X2 and X3, Zero is utilizing Sigma's saber, or a spare given to him by Dr. Cain, considering that the Z-Saber wasn't part of Zero's arsenal in Mega Man X1 or in any prior appearances. Since in the alternate scenario, it's Sigma who gives Zero his saber in Mega Man X2, it lends weight to the theory.
  • In all four Mega Man Zero games, holding the down button as well as the attack button while falling would continue the mid-air slash animation, and give it one extra point of damage, though this technique was never covered in any existing guides. However, this was acknowledged in the ZX series and was dubbed Skull Crush.
  • An artwork of the Mega Man Zero 2 shows Zero holding two Z-Sabers, which is not possible in the game.

Gallery[]

See also: Zero/Gallery

Animation[]

References[]


Advertisement