Americium-241

Americium-241, ²⁴¹Am

Small button containing 241AmO2 from a smoke alarm
General
Symbol	241Am
Names	americium-241, 241Am, Am-241
Protons (Z)	95
Neutrons (N)	146
Nuclide data
Natural abundance	0 (synthetic)
Half-life (t1/2)	432.6±0.6 years[1]
Isotope mass	241.0568273(12)[1] Da
Spin	5/2−
Excess energy	52934.3±1.1[1] keV
Binding energy	7543.2795(46)[1] keV
Parent isotopes	241Pu (β−) 241Cm (EC) 245Bk (α)
Decay products	237Np
Decay modes
Decay mode	Decay energy (MeV)
α-decay (alpha)	5.486
γ-emission (gamma)	0.0595409
CD (cluster decay)	93.923
Isotopes of americium Complete table of nuclides

Americium-241 (²⁴¹Am, Am-241) is an isotope of americium. Like all isotopes of americium, it is radioactive, with a half-life of 432.2 years. ²⁴¹Am is the most common isotope of americium as well as the most prevalent isotope of americium in nuclear waste. It is commonly found in ionization type smoke detectors and is a potential fuel for long-lifetime radioisotope thermoelectric generators (RTGs). Its common parent nuclides are β⁻ from ²⁴¹Pu, EC from ²⁴¹Cm, and α from ²⁴⁵Bk. ²⁴¹Am is not fissile, but is fissionable, and the critical mass of a bare sphere is 57.6–75.6 kilograms (127.0–166.7 lb) and a sphere diameter of 19–21 centimetres (7.5–8.3 in).^[2] Americium-241 has a specific activity of 3.43 Ci/g (126.91 GBq/g).^[3] It is commonly found in the form of americium-241 dioxide (²⁴¹AmO₂). This isotope also has one meta state, ^241mAm, with an excitation energy of 2.2 MeV (0.35 pJ) and a half-life of 1.23 μs. The presence of ²⁴¹Am in plutonium is determined by the original concentration of plutonium-241 and the sample age. Because of the low penetration of alpha radiation, americium-241 only poses a health risk when ingested or inhaled. Older samples of plutonium containing ²⁴¹Pu contain a buildup of ²⁴¹Am. Chemical removal of americium-241 from reworked plutonium (e.g., during reworking of plutonium pits) may be required in some cases.

Americium-241 has been produced in small quantities in nuclear reactors for decades, and many kilograms of ²⁴¹Am have been accumulated by now.^[4]: 1262 Nevertheless, since it was first offered for sale in 1962, its price, about US$1,500 per gram of ²⁴¹Am, remains almost unchanged owing to the very complex separation procedure.^[5]

Americium-241 is not synthesized directly from uranium – the most common reactor material – but from plutonium-239 (²³⁹Pu). The latter needs to be produced first, according to the following nuclear process:

${\displaystyle \mathrm {^{238}_{\ 92}U\ {\xrightarrow {(n,\gamma )}}\ _{\ 92}^{239}U\ {\xrightarrow[{23.5\ min}]{\beta ^{-}}}\ _{\ 93}^{239}Np\ {\xrightarrow[{2.3565\ d}]{\beta ^{-}}}\ _{\ 94}^{239}Pu} }$

The capture of two neutrons by ²³⁹Pu (a so-called (n,γ) reaction), followed by a β-decay, results in ²⁴¹Am:

${\displaystyle \mathrm {^{239}_{\ 94}Pu\ {\xrightarrow {2~(n,\gamma )}}\ _{\ 94}^{241}Pu\ {\xrightarrow[{14.35\ yr}]{\beta ^{-}}}\ _{\ 95}^{241}Am} }$

The plutonium present in spent nuclear fuel contains about 12% of ²⁴¹Pu. Because it converts to ²⁴¹Am, ²⁴¹Pu can be extracted and may be used to generate further ²⁴¹Am.^[5] However, this process is rather slow: half of the original amount of ²⁴¹Pu decays to ²⁴¹Am after about 14 years, and the ²⁴¹Am amount reaches a maximum after 70 years.^[6]

The obtained ²⁴¹Am can be used for generating heavier americium isotopes by further neutron capture inside a nuclear reactor. In a light water reactor (LWR), 79% of neutron captures on ²⁴¹Am convert to ²⁴²Am and 10% to its nuclear isomer ^242mAm:^[7]

79%:   ${\displaystyle \mathrm {^{241}_{\ 95}Am\ {\xrightarrow {(n,\gamma )}}\ _{\ 95}^{242}Am} }$

Americium-241 decays mainly via alpha decay, with a weak gamma ray byproduct. The α-decay is shown as follows:

${\displaystyle \mathrm {^{241\!\,}_{\ 95}Am\ {\overset {432.2y}{\longrightarrow }}\ _{\ 93}^{237}Np~+~_{2}^{4}\alpha ^{2+}+\gamma ~59.5409~keV} }$

The α-decay energies are 5.486 MeV (0.8790 pJ) for 85% of the time (the one which is widely accepted for standard α-decay energy), 5.443 MeV (0.8721 pJ) for 13% of the time, and 5.388 MeV (0.8633 pJ) for the remaining 2%.^[8] The γ-ray energy is 59.5409 keV (9.53950 fJ) for the most part, with little amounts of other energies such as 13.9 keV (2.23 fJ), 17.8 keV (2.85 fJ) and 26.4 keV (4.23 fJ).^[9]

The second most common type of decay that americium-241 undergoes is spontaneous fission, with a branching ratio of 3.6×10^−12[10] and happening 1.2 times a second per gram of ²⁴¹Am. It is written as such (the asterisk denotes an excited nucleus):

${\displaystyle \mathrm {^{241}_{\ 95}Am\longrightarrow ~_{\ 95}^{241}Am^{*}\longrightarrow 3_{0}^{1}n~+~fission~products~+energy~(\gamma )} }$

The least common (rarest) type of decay for americium-241 is ³⁴
Si
cluster decay, with a branching ratio of less than 7.4×10⁻¹⁶.^[10] It is written as follows:

${\displaystyle \mathrm {^{241\!\,}_{\ 95}Am\longrightarrow _{\ 81}^{207}Tl+_{14}^{34}Si} }$

Americium-241 is the only synthetic isotope to have found its way into the household, where the most common type of smoke detector (the ionization-type) uses ²⁴¹
Am
O
₂ (americium-241 dioxide) as its source of ionizing radiation.^[11] This isotope is preferred over ²²⁶
Ra
because it emits 5 times more alpha particles and relatively little harmful gamma radiation. With its half-life of 432.2 years, the americium in a smoke detector decreases and includes about 3% neptunium after 19 years, and about 5% after 32 years. The amount of americium in a typical new smoke detector is 0.29 micrograms (4.5×10⁻⁶ grains) (about 1/3000 the weight of a small grain of sand) with an activity of 1 microcurie (37 kBq). Some old industrial smoke detectors (notably from the Pyrotronics Corporation) can contain up to 80 microcuries (3,000 kBq). The amount of ²⁴¹Am declines slowly as it decays into neptunium-237 (²³⁷Np), a different transuranic element with a much longer half-life (about 2.14 million years). The radiated alpha particles pass through an ionization chamber, an air-filled space between two electrodes, which allows a small, constant electric current to pass between the capacitor plates due to the radiation ionizing the air space between. Any smoke that enters the chamber blocks/absorbs some of the alpha particles from freely passing through and reduces the ionization and therefore causes a drop in the current. The alarm's circuitry detects this drop in the current and as a result, triggers the piezoelectric buzzer to sound. Compared to the alternative optical smoke detector, the ionization smoke detector is cheaper and can detect particles which are too small to produce significant light scattering. However, it is more prone to false alarms.^{[12][13][14][15]}

The process for making the americium used in the buttons on ionization-type smoke detectors begins with americium dioxide. The ²⁴¹AmO₂ is thoroughly mixed with gold, shaped into a briquette, and fused by pressure and heat at over 1,470 °F (800 °C). A backing of silver and a front covering of gold (or an alloy of gold or palladium) are applied to the briquette and sealed by hot forging. The briquette is then processed through several stages of cold rolling to achieve the desired thickness and levels of radiation emission. The final thickness is about 0.008 inches (0.20 mm), with the gold cover representing about one percent of the thickness. The resulting foil strip, which is about 0.8 inches (20 mm) wide, is cut into sections 39 inches (1 m) long. The sources are punched out of the foil strip. Each disc, about 0.2 inches (5.1 mm) in diameter, is mounted in a metal holder, usually made of aluminium. The holder is the housing, which is the majority of what is seen on the button. The thin rim on the holder is rolled over to completely seal the cut edge around the disc.^[16]

As ²⁴¹Am has a roughly similar half-life to ²³⁸Pu (432.2 years vs. 87 years), it has been proposed as an active isotope of radioisotope thermoelectric generators, for use in spacecraft.^[17] Even though americium-241 produces less heat and electricity than plutonium-238 (the power yield is 114.7 milliwatts per gram [3.25 watts per ounce] for ²⁴¹Am vs. 570 mW/g [16 W/oz] for ²³⁸Pu)^[17] and its radiation poses a greater threat to humans owing to gamma and neutron emission, it has advantages for long duration missions with its significantly longer half-life. The European Space Agency is working on RTGs based on americium-241 for its space probes^[18] as a result of the global shortage of plutonium-238 and easy access to americium-241 in Europe from nuclear waste reprocessing.^[19][20]

Its shielding requirements in an RTG are the second lowest of all possible isotopes: only ²³⁸Pu requires less. An advantage over ²³⁸Pu is that it is produced as nuclear waste and is nearly isotopically pure. Prototype designs of ²⁴¹Am RTGs expect 2–2.2 W_e/kg for 5–50 W_e RTGs design, putting ²⁴¹Am RTGs at parity with ²³⁸Pu RTGs within that power range, as the vast majority of the mass of an RTG is not the isotopes, but the thermoelectrics, radiators, and isotope containment mass.^[21]

Oxides of ²⁴¹Am pressed with beryllium can be very efficient neutron sources, since they emit alpha particles during radioactive decay:

${\displaystyle \mathrm {^{241\!\,}_{\ 95}Am\ {\overset {432.2y}{\longrightarrow }}\ _{\ 93}^{237}Np\ +\ _{2}^{4}\alpha ^{2+}+\ \gamma ~59.5~keV} }$

Here americium acts as the alpha source, and beryllium produces neutrons owing to its large cross-section for the (α,n) nuclear reaction:

${\textstyle \mathrm {^{9}_{4}Be\ +\ _{2}^{4}\alpha ^{2+}\longrightarrow \ _{\ 6}^{12}C\ +\ _{0}^{1}n\ +\ \gamma } }$

The most widespread use of ²⁴¹
Am
Be neutron sources is a neutron probe – a device used to measure the quantity of water present in soil, as well as moisture/density for quality control in highway construction. ²⁴¹Am neutron sources are also used in well logging applications, as well as in neutron radiography, tomography, and other radiochemical investigations.^[22]

Americium-241 is sometimes used as a starting material for the production of other transuranic elements and transactinides – for example, neutron bombardment of ²⁴¹Am yields ²⁴²Am:

${\displaystyle \mathrm {^{241}_{\ 95}Am\ {\xrightarrow {(n,\gamma )}}\ _{\ 95}^{242}Am} }$

From there, 82.7% of ²⁴²Am decays to ²⁴²Cm and 17.3% to ²⁴²Pu:

82.7% → ${\displaystyle \mathrm {^{241}_{\ 95}Am\ {\xrightarrow {(n,\gamma )}}\ _{\ 95}^{242}Am\ {\xrightarrow[{16.02\ h}]{\beta ^{-}}}\ _{\ 96}^{242}Cm} }$

17.3%→ ${\displaystyle \mathrm {^{241}_{\ 95}Am\ {\xrightarrow {(n,\gamma )}}\ _{\ 95}^{242}Am\ {\xrightarrow[{16.02\ h}]{\beta ^{+}}}\ _{\ 94}^{242}Pu} }$

In the nuclear reactor, ²⁴²Am is also up-converted by neutron capture to ²⁴³Am and ²⁴⁴Am, which transforms by β-decay to ²⁴⁴Cm:

${\displaystyle \mathrm {^{242}_{\ 95}Am{\xrightarrow {(n,\gamma )}}~_{\ 95}^{243}Am\ {\xrightarrow {(n,\gamma )}}\ _{\ 95}^{244}Am\ {\xrightarrow[{10.1\ h}]{\beta ^{-}}}\ _{\ 96}^{244}Cm} }$

Irradiation of ²⁴¹Am by ¹²C or ²²Ne ions yields einsteinium-253 (²⁵³Es) or dubnium-263 (²⁶³Db), respectively.^[23] Furthermore, the element berkelium (²⁴³Bk isotope) had been first intentionally produced and identified by bombarding ²⁴¹Am with alpha particles, in 1949, by the same Berkeley group, using the same 60-inch (1,500 mm) cyclotron that had been used for many previous experiments.^[4]: 1262

Americium-241 has been used as a portable source of both gamma rays and alpha particles for a number of medical and industrial uses. The 59.5409 keV (9.53950 fJ) gamma ray emissions from ²⁴¹Am in such sources can be used for indirect analysis of materials in radiography and X-ray fluorescence spectroscopy, as well as for quality control in fixed nuclear density gauges and nuclear densometers. For example, this isotope has been employed to gauge glass thickness to help create flat glass.^[4]: 1262 Americium-241 is also suitable for calibration of gamma-ray spectrometers in the low-energy range, since its spectrum consists of nearly a single peak and negligible Compton continuum (at least three orders of magnitude lower intensity).^[24]

Gamma rays from americium-241 have been used to provide passive diagnosis of thyroid function. This medical application is now obsolete. Americium-241's gamma rays can provide reasonable quality radiographs, with a 10-minute exposure time. ²⁴¹Am radiographs have only been taken experimentally due to the long exposure time which increases the effective dose to living tissue. Reducing exposure duration reduces the chance of ionization events causing damage to cells and DNA, and is a critical component in the "time, distance, shielding" maxim used in radiation protection.^[25]

This section's factual accuracy is disputed. Relevant discussion may be found on the talk page. Please help to ensure that disputed statements are reliably sourced. (February 2020) (Learn how and when to remove this message)

Americium-241 has the same general hazards as other americium isotopes: it is both extremely toxic and radioactive. Though α-particles can be stopped by a sheet of paper, there are serious health concerns for ingestion of α-emitters. Americium and its isotopes are also very chemically toxic as well, in the form of heavy-metal toxicity. As little as 0.03 microcuries (1.1 kBq) is the maximum permissible body burden for ²⁴¹Am.^[26]

Americium-241 is an α-emitter with a weak γ-ray byproduct. Safely handling americium-241 requires knowing and following proper safety precautions, as without them it would be extremely dangerous. Its specific gamma dose constant is 3.14×10⁻¹ mR/hr/mCi or 8.48×10⁻⁵ mSv/hr/MBq at 1 metre (3 ft 3 in).^[27]

If consumed, americium-241 is excreted within a few days and only 0.05% is absorbed in the blood. From there, roughly 45% of it goes to the liver and 45% to the bones, and the remaining 10% is excreted. The uptake to the liver depends on the individual and increases with age. In the bones, americium is first deposited over cortical and trabecular surfaces and slowly redistributes over the bone with time. The biological half-life of ²⁴¹Am is 50 years in the bones and 20 years in the liver, whereas in the gonads (testicles and ovaries) it remains permanently; in all these organs, americium promotes formation of cancer cells as a result of its radioactivity.^[28]

Americium-241 often enters landfills from discarded smoke detectors. The rules associated with the disposal of smoke detectors are relaxed in most jurisdictions. In the U.S., the "Radioactive Boy Scout" David Hahn was able to concentrate americium-241 from smoke detectors after managing to buy a hundred of them at remainder prices and also stealing a few.^{[29][30][31][32]} There have been a few cases of exposure to americium-241, the worst being Harold McCluskey who, at age 64, was exposed to 500 times the occupational standard for americium-241 as a result of an explosion in his lab. McCluskey died at age 75, not as a result of exposure, but of a heart disease which he had before the accident.^[33][34] Americium-241 has also been detected in the oceans as a result of nuclear testing conducted by various nations.^[35]

• Isotopes of americium