Europa Clipper

Europa Clipper

Artist's rendering of the Europa Clipper spacecraft
Names	Europa Multiple Flyby Mission
Mission type	Europa reconnaissance
Operator	NASA
COSPAR ID	2024-182A
SATCAT no.	61507
Website	europa.nasa.gov
Mission duration	Cruise: 5.5 years[1][2] Science phase: 4 years Elapsed: 37 days, 8 hours, 32 minutes
Spacecraft properties
Manufacturer	Jet Propulsion Laboratory
Launch mass	6,065 kg (13,371 lb),[3][4][5] including 2,750 kg (6,060 lb) propellant[6]
Dry mass	3,241 kg (7,145 lb)[7]
Payload mass	352 kg (776 lb)
Dimensions	Height: 6 m (20 ft) Solar panel span: 22 m (72 ft)[4]
Power	600 watts from solar panels[8]
Start of mission
Launch date	October 14, 2024, 16:06:00 (2024-10-14UTC16:06Z) UTC (12:06 p.m. EDT)
Rocket	Falcon Heavy Block 5[9]
Launch site	Kennedy, LC-39A
Contractor	SpaceX
Flyby of Mars (gravity assist)
Closest approach	March 1, 2025[10]
Flyby of Earth (gravity assist)
Closest approach	December 3, 2026[11]
Jupiter orbiter
Orbital insertion	April 11, 2030 (first closest approach to Europa)[12]
Orbits	49[4][13]
Instruments PIMS Plasma Instrument for Magnetic Sounding ECM Europa Clipper Magnetometer MISE Mapping Imaging Spectrometer for Europa EIS Europa Imaging System REASON Radar for Europa Assessment and Sounding: Ocean to Near-surface E-THEMIS Europa Thermal Emission Imaging System MASPEX MAss SPectrometer for Planetary EXploration Europa-UVS Europa-Ultraviolet Spectrograph SUDA SUrface Dust Analyzer[14]
Europa Clipper mission patch Large Strategic Science Missions Planetary Science Division ← Mars 2020 Mars Sample Return → Solar System Exploration program ← DART Uranus Orbiter and Probe →

Europa Clipper (previously known as Europa Multiple Flyby Mission) is a space probe developed by NASA to study Europa, a Galilean moon of Jupiter. It was launched on October 14, 2024.^[15] The spacecraft will use gravity assists from Mars on March 1, 2025,^[10] and Earth on December 3, 2026,^[11] before arriving at Europa in April 2030.^[16] The spacecraft will then perform a series of flybys of Europa while in orbit around Jupiter.^[17][18]

Europa Clipper is designed to follow up on evidence for a subsurface ocean underneath Europa's ice crust, found using the Galileo spacecraft which orbited Jupiter from 1995 to 2003. Plans to send a spacecraft to Europa were initially conceived with projects such as Europa Orbiter and Jupiter Icy Moons Orbiter, in which a spacecraft would be inserted into orbit around Europa. However, due to the adverse effects of radiation from the magnetosphere of Jupiter in Europa orbit, it was decided that it would be safer to insert a spacecraft into an elliptical orbit around Jupiter and make 49 close flybys of the moon instead.^[19] The Europa Clipper spacecraft is larger than any other used for previous NASA planetary missions.^[20]

Europa Clipper complements the European Space Agency's Jupiter Icy Moons Explorer, launched in 2023, which will attempt to fly past Europa twice and Callisto multiple times before moving into orbit around Ganymede.

In 1997, a Europa Orbiter mission was proposed by a team for NASA's Discovery Program^[21] but was not selected. NASA's JPL announced one month after the selection of Discovery proposals that a NASA Europa orbiter mission would be conducted. JPL then invited the Discovery proposal team to be the Mission Review Committee (MRC).^{[citation needed]}

At the same time as the proposal of the Discovery-class Europa Orbiter, the robotic Galileo spacecraft was already orbiting Jupiter. From December 8, 1995, to December 7, 1997, Galileo conducted the primary mission after entering the orbit of Jupiter. On that final date, the Galileo orbiter commenced an extended mission known as the Galileo Europa Mission (GEM), which ran until December 31, 1999. This was a low-cost mission extension with a budget of only US$30 million. The smaller team of about 40–50 people (compared with the primary mission's 200-person team from 1995 to 1997) did not have the resources to deal with problems, but when they arose, it was able to temporarily recall former team members (called "tiger teams") for intensive efforts to solve them. The spacecraft made several flybys of Europa (8), Callisto (4) and Io (2). On each flyby of the three moons it encountered, the spacecraft collected only two days' worth of data instead of the seven it had collected during the primary mission.^[22] During GEM's eight flybys of Europa, it ranged from 196 to 3,582 km (122 to 2,226 mi), in two years.^[22]

Europa has been identified as one of the locations in the Solar System that could possibly harbor microbial extraterrestrial life.^[23][24][25] Immediately following the Galileo spacecraft's discoveries and the independent Discovery program proposal for a Europa orbiter, JPL conducted preliminary mission studies that envisioned a capable spacecraft such as the Jupiter Icy Moons Orbiter (a US$16 billion mission concept),^[26] the Jupiter Europa Orbiter (a US$4.3 billion concept), another orbiter (US$2 billion concept), and a multi-flyby spacecraft: Europa Clipper.^[27]

A mission to Europa was recommended by the National Research Council in 2013.^[23][25] The approximate cost estimate rose from US$2 billion in 2013 to US$4.25 billion in 2020.^[28][29] The mission is a joint project between the Johns Hopkins University's Applied Physics Laboratory (APL), and the Jet Propulsion Laboratory (JPL).^[1][30] The mission's name is a reference to the lightweight clipper ships of the 19th century that routinely plied trade routes around the world.^[31] The moniker was chosen because the spacecraft will sail past Europa, as frequently as every two weeks.^[31]

In March 2013, US$75 million was authorized to expand on the formulation of mission activities, mature the proposed science goals, and fund preliminary instrument development,^[32] as suggested in 2011 by the Planetary Science Decadal Survey.^[1][25] In May 2014, a House bill substantially increased the Europa Clipper (referred to as Europa Multiple Flyby Mission) funding budget for the 2014 fiscal year from US$15 million^[33][34] to US$100 million to be applied to pre-formulation work.^[35][36] Following the 2014 election cycle, bipartisan support was pledged to continue funding for the Europa Multiple Flyby Mission project.^[37][38] The executive branch also granted US$30 million for preliminary studies.^[39][40]

In April 2015, NASA invited the European Space Agency to submit concepts for an additional probe to fly together with the Europa Clipper spacecraft, with a mass limit of 250 kg.^[41] It could be a simple probe, an impactor,^[42] or a lander.^[43] An internal assessment at European Space Agency (ESA) considered whether there was interest and funds available,^{[44][45][46][47]} opening a collaboration scheme similar to the very successful Cassini–Huygens approach.^[47] In May 2015, NASA chose nine instruments that would fly on board the orbiter, budgeted to cost about US$110 million over the next three years.^[48] In June 2015, NASA approved the mission concept, allowing the orbiter to move to its formulation stage.^[49] In January 2016, NASA approved the addition of a lander,^[50][51] but this was canceled in 2017 because it was deemed too risky.^[52] In May 2016, the Ocean Worlds Exploration Program was approved,^[53] of which the Europa mission is part.^[54]

In February 2017, the mission moved from Phase A to Phase B (the preliminary design phase).^[55] On July 18, 2017, the House Space Subcommittee held hearings on the Europa Clipper as a scheduled Large Strategic Science Missions class, and to discuss a possible follow up mission simply known as the Europa Lander.^[56] Phase B continued into 2019.^[55] In addition, subsystem vendors were selected, as well as prototype hardware elements for the science instruments. Spacecraft sub-assemblies were built and tested as well.^[55]

In July 2024, the spacecraft faced concerns of delay and missing the launch window because of a discovery in June 2024 that its components were not as radiation-hardened as previously believed.^[57] However, over the summer, intensive re-testing of the transistor components in question found that they would likely be annealed enough to 'self-heal'.^[58][59] In September 2024, Europa Clipper was approved for a launch window opening on October 10, 2024;^[58][60][59] however, on October 6, 2024, NASA announced that it would be standing down from the October 10 launch due to Hurricane Milton. Europa Clipper was finally launched on October 14, 2024.^[61]

On August 19, 2019, the Europa Clipper proceeded to Phase C: final design and fabrication.^[62]

On March 3, 2022, the spacecraft moved on to Phase D: assembly, testing, and launch.^[63] On June 7, 2022, the main body of the spacecraft was completed.^[64] By August 2022, the high-gain antenna had completed its major testing campaigns.^[65]

By January 30, 2024, all of the science instruments were added to the spacecraft. The REASON instrument's electronics were aboard the spacecraft, while its antennas were added to the spacecraft's solar arrays at Kennedy Space Center later in the year.^[66] In March 2024, it was reported that the spacecraft underwent successful testing and was on track for launch later in the year.^[67] In May 2024, the spacecraft arrived at Kennedy Space Center for final launch preparations.^[68] In September 2024, final pre-launch review was successfully completed, clearing the way for launch.^[69] In early October 2024, due to the incoming Hurricane Milton, the spacecraft was placed in secure storage for safekeeping until the hurricane passed.^[61]

The probe is scheduled to be crashed into Jupiter, Ganymede, or Callisto, to protect it from crashing into Europa. In June 2022, lead project scientist Robert Pappalardo revealed that mission planners for Europa Clipper were considering disposing of the probe by crashing it into the surface of Ganymede in case an extended mission was not approved early in the main science phase. He noted that an impact would help the ESA's JUICE mission collect more information about Ganymede's surface chemistry.^[70][71] In a 2024 paper, Pappalardo said the mission would last four years in Jupiter orbit, and that the disposal was targeted for September 3, 2034, if NASA did not approve a mission extension.^[72]

The goals of Europa Clipper are to explore Europa, investigate its habitability and aid in the selection of a landing site for the proposed Europa Lander.^[51][73] This exploration is focused on understanding the three main requirements for life: liquid water, chemistry, and energy.^[74] Specifically, the objectives are to study:^[30]

• Ice shell and ocean: Confirm the existence and characterize the nature of water within or beneath the ice, and study processes of surface-ice-ocean exchange.
• Composition: Distribution and chemistry of key compounds and the links to ocean composition.
• Geology: Characteristics and formation of surface features, including sites of recent or current activity.

Because Europa lies well within the harsh radiation fields surrounding Jupiter, even a radiation-hardened spacecraft in near orbit would be functional for just a few months.^[27] Most instruments can gather data far faster than the communications system can transmit it to Earth due to the limited number of antennas available on Earth to receive the scientific data.^[27] Therefore, another key limiting factor on science for a Europa orbiter is the time available to return data to Earth. In contrast, the amount of time during which the instruments can make close-up observations is less important.^[27]

Studies by scientists from the Jet Propulsion Laboratory show that by performing several flybys with many months to return data, the Europa Clipper concept will enable a US$2 billion mission to conduct the most crucial measurements of the canceled US$4.3 billion Jupiter Europa Orbiter concept.^[27] Between each of the flybys, the spacecraft will have seven to ten days to transmit data stored during each brief encounter. That will let the spacecraft have up to a year of time to transmit its data compared to just 30 days for an orbiter. The result will be almost three times as much data returned to Earth, while reducing exposure to radiation.^[27] Europa Clipper will not orbit Europa, but will instead orbit Jupiter and conduct 44 flybys of Europa, each at altitudes ranging from 25 km to 2,700 km (16 mi to 1,678 mi) during its 3.5-year mission.^[4][2][75] A key feature of the mission concept is that Europa Clipper would use gravity assists from Europa, Ganymede and Callisto to change its trajectory, allowing the spacecraft to return to a different close approach point with each flyby.^[2] Each flyby would cover a different sector of Europa to achieve a medium-quality global topographic survey, including ice thickness.^[76] Europa Clipper could conceivably fly by at low altitude through the plumes of water vapor erupting from the moon's ice crust, thus sampling its subsurface ocean without having to land on the surface and drill through the ice.^[33][34]

The spacecraft is expected to receive a total ionizing dose of 2.8 megarads (28 kGy) during the mission. Shielding from Jupiter's harsh radiation belt will be provided by a radiation vault with 0.3 inches (7.6 mm) thick aluminum alloy walls, which enclose the spacecraft electronics.^[77] To maximize the effectiveness of this shielding, the electronics are also nested in the core of the spacecraft for additional radiation protection.^[76]

This mission is a flight of NASA's Planetary Science Division, designated a Large Strategic Science Mission, and funded under the Planetary Missions Program Office's Solar System Exploration program as its second flight.^[56][78] It is also supported by the new Ocean Worlds Exploration Program.^[54]

The spacecraft bus is a 5-meter-long combination of a 150-cm-wide aluminum cylindrical propulsion module and a rectangular box.^[6] The electronic components are protected from the intense radiation by a 150-kilogram titanium, zinc and aluminum shielded vault in the box.^[4][76] The spacecraft payload and trajectory are subject to change as the mission design matures.^{[79][needs update]}

Both radioisotope thermoelectric generator (RTG) and photovoltaic power sources were assessed to power the orbiter.^[80] Although solar power is only 4% as intense at Jupiter as it is in Earth's orbit, powering a Jupiter orbital spacecraft by solar panels was demonstrated by the Juno mission. The alternative to solar panels was a multi-mission radioisotope thermoelectric generator (MMRTG), fueled with plutonium-238.^[2][76] The power source has already been demonstrated in the Mars Science Laboratory (MSL) mission. Five units were available, with one reserved for the Mars 2020 rover mission and another as backup. In September 2013, it was decided that the solar array was the less expensive option to power the spacecraft, and on October 3, 2014, it was announced that solar panels were chosen to power Europa Clipper. The mission's designers determined that solar power was both cheaper than plutonium and practical to use on the spacecraft.^[80] Despite the increased weight of solar panels compared to plutonium-powered generators, the vehicle's mass had been projected to still be within acceptable launch limits.^[81]

Each panel has a surface area of 18 m² (190 sq ft) and produces 150 watts continuously when pointed towards the Sun while orbiting Jupiter.^[82] While in Europa's shadow, batteries will enable the spacecraft to continue gathering data. However, ionizing radiation can damage solar panels. The Europa Clipper's orbit will pass through Jupiter's intense magnetosphere, which is expected to gradually degrade the solar panels as the mission progresses.^[76] The solar panels were provided by Airbus Defence and Space, Netherlands.^[83]

The propulsion subsystem was built by NASA's Goddard Space Flight Center in Greenbelt, Maryland. It is part of the Propulsion Module,^[84] delivered by Johns Hopkins Applied Physics Laboratory in Laurel, Maryland. It is 3 metres (10 ft) tall, 1.5 metres (5 ft) in diameter and comprises about two-thirds of the spacecraft's main body. The propulsion subsystem carries nearly 2,700 kilograms (6,000 lb) of monomethyl hydrazine and dinitrogen tetroxide propellant, 50% to 60% of which will be used for the 6 to 8-hour Jupiter orbit insertion burn. The spacecraft has a total of 24 rocket engines rated at 27.5 N (6.2 lbf) thrust for attitude control and propulsion.^[6]

This section needs expansion. You can help by adding to it. (October 2024)

The probe contains multiple antennas, including the high-gain antenna, which has a 3.1-meter (10-foot) diameter. The high-gain antenna operates on X-band frequencies of 7.2 and 8.4 gigahertz, and a Ka-band frequency of 32 gigahertz (12 times that of a typical cell phone).The antennas will be used to research gravity and radio science, allowing researchers to learn more about Europa's gravity^[85] It was designed and constructed by a team led by Matt Bray at the Johns Hopkins Applied Physics Laboratory, before being tested at Langley Research Center and Goddard Space Flight Center in the spring and summer of 2022.^[65]

The Europa Clipper mission is equipped with nine scientific instruments.^[86] The nine science instruments for the orbiter, announced in May 2015, have a planned total mass of 82 kg (181 lb).^{[needs update][87]}

The Europa Thermal Emission Imaging System will provide high spatial resolution as well as multi-spectral imaging of the surface of Europa in the mid to far infrared bands to help detect geologically active sites and areas, such as potential vents erupting plumes of water into space. The principal investigator is Philip Christensen of Arizona State University. This instrument is derived from the Thermal Emission Imaging System (THEMIS) on the 2001 Mars Odyssey orbiter, also developed by Philip Christensen.^[88]

The Mapping Imaging Spectrometer for Europa is an imaging near infrared spectrometer to probe the surface composition of Europa, identifying and mapping the distributions of organics (including amino acids and tholins^[89][90]), salts, acid hydrates, water ice phases, and other materials. From these measurements, scientists expect to be able to relate the moon's surface composition to the habitability of its ocean.^[90][91] The principal investigator is Diana Blaney of Jet Propulsion Laboratory and the instrument was built in collaboration with the Johns Hopkins University Applied Physics Laboratory (APL).

The Europa Imaging System is a visible spectrum imaging suite to map Europa's surface and study smaller areas in high resolution, as low as 0.5 m (20 in) per pixel. The principal investigator is Elizabeth Turtle of the Applied Physics Laboratory. It consists of two cameras, both of which use 2048x4096 pixel CMOS detectors:^[92][93]

• The Wide-angle Camera (WAC) has a field of view of 48° by 24° and a resolution of 11 m (36 ft) from a 50 km (31 mi) altitude. Optically the WAC uses 8 lens refractive optics with an 8 mm aperture and a 46 mm focal length which give it a f-number of f/5.75.^[93] The WAC will obtain stereo imagery swaths throughout the mission.
• The Narrow-angle Camera (NAC) has a 2.3° by 1.2° field of view, giving it a resolution of 0.5 m (20 in) per pixel from a 50 km (31 mi) altitude. Optically the NAC uses a Ritchey Chrétien Cassegrain telescope with a 152 mm aperture and a 1000 mm focal length which give it a f-number of f/6.58.^[93] The NAC is mounted on a 2-axis gimbal, allowing it to point at specific targets regardless of the main spacecraft's orientation. This will allow for mapping of >95% of Europa's surface at a resolution of ≤50 m (160 ft) per pixel. For reference, only around 14% of Europa's surface has previously been mapped at a resolution of ≤500 m (1,600 ft) per pixel.

The Europa Ultraviolet Spectrograph instrument will be able to detect small plumes and will provide valuable data about the composition and dynamics of the moon's exosphere. The principal investigator is Kurt Retherford of Southwest Research Institute. Retherford was previously a member of the group that discovered plumes erupting from Europa while using the Hubble Space Telescope in the UV spectrum.^[94]

The Radar for Europa Assessment and Sounding: Ocean to Near-surface (REASON)^[95][96] is a dual-frequency ice penetrating radar (9 and 60 MHz) instrument that is designed to characterize and sound Europa's ice crust from the near-surface to the ocean, revealing the hidden structure of Europa's ice shell and potential water pockets within. REASON will probe the exosphere, surface and near-surface and the full depth of the ice shell to the ice-ocean interface up to 30 km. The principal investigator is Donald Blankenship of the University of Texas at Austin.^[97] This instrument was built by Jet Propulsion Laboratory.^[90][95]

The Europa Clipper Magnetometer (ECM) will be used to characterize the magnetic fields around Europa. The instrument consists of three magnetic flux gates placed along an 8 m (25 ft) boom, which were stowed during launch and deployed afterwards.^[98] By studying the strength and orientation of Europa's magnetic field over multiple flybys, scientists hope to be able to confirm the existence of Europa's subsurface ocean, as well as characterize the thickness of its icy crust and measure the water's depth and salinity. The instrument team leader is Margaret Kivelson, University of Michigan.^[99][100]

ECM replaced the proposed Interior Characterization of Europa using Magnetometry (ICEMAG) instrument, which was canceled due to cost overruns.^[101] ECM is a simpler and cheaper magnetometer than ICEMAG would have been.^[102]

The Plasma Instrument for Magnetic Sounding (PIMS) measures the plasma surrounding Europa to characterize the magnetic fields generated by plasma currents. These plasma currents mask the magnetic induction response of Europa's subsurface ocean. In conjunction with a magnetometer, it is key to determining Europa's ice shell thickness, ocean depth, and salinity. PIMS will also probe the mechanisms responsible for weathering and releasing material from Europa's surface into the atmosphere and ionosphere and understanding how Europa influences its local space environment and Jupiter's magnetosphere. The principal investigator is Joseph Westlake of the Applied Physics Laboratory.^[103][104]

The Mass Spectrometer for Planetary Exploration (MASPEX) will determine the composition of the surface and subsurface ocean by measuring Europa's extremely tenuous atmosphere and any surface materials ejected into space. Jack Waite, who led development of MASPEX, was also Science Team Lead of the Ion and Neutral Mass Spectrometer (INMS) on the Cassini spacecraft. The principal investigator is Jim Burch of Southwest Research Institute, who was previously the leader of the Magnetospheric Multiscale Mission.^[105][106]

The SUrface Dust Analyzer (SUDA)^[14] is a mass spectrometer that will measure the composition of small solid particles ejected from Europa, providing the opportunity to directly sample the surface and potential plumes on low-altitude flybys. The instrument is capable of identifying traces of organic and inorganic compounds in the ice of ejecta,^[107] and is sensitive enough to detect signatures of life even if the sample contains less than a single bacterial cell in a collected ice grain. The principal investigator is Sascha Kempf of the University of Colorado Boulder.^[108]

Although it was designed primarily for communications, the high-gain radio antenna will be used to perform additional radio observations and investigate Europa's gravitational field, acting as a radio science subsystem. Measuring the Doppler shift in the radio signals between the spacecraft and Earth will allow the spacecraft's motion to be determined in detail. As the spacecraft performs each of its 45 Europa flybys, its trajectory will be altered by the moon's gravitational field. The Doppler data will be used to determine the higher order coefficients of that gravity field, to determine the moon's interior structure, and to examine how Europa is deformed by tidal forces.^[109] The instrument team leader is Erwan Mazarico of NASA's Goddard Space Flight Center.^[110]

Congress had originally mandated that Europa Clipper be launched on NASA's Space Launch System (SLS) super heavy-lift launch vehicle, but NASA had requested that other vehicles be allowed to launch the spacecraft due to a foreseen lack of available SLS vehicles.^[111] The United States Congress's 2021 omnibus spending bill directed the NASA Administrator to conduct a full and open competition to select a commercial launch vehicle if the conditions to launch the probe on a SLS rocket cannot be met.^[112]

On January 25, 2021, NASA's Planetary Missions Program Office formally directed the mission team to "immediately cease efforts to maintain SLS compatibility" and move forward with a commercial launch vehicle.^[16]

On February 10, 2021, it was announced that the mission would use a 5.5-year trajectory to the Jovian system, with gravity-assist maneuvers involving Mars (March 1, 2025) and Earth (December 3, 2026). Launch was targeted for a 21-day period between October 10 and 30, 2024, giving an arrival date in April 2030, and backup launch dates were identified in 2025 and 2026.^[16]

The SLS option would have entailed a direct trajectory to Jupiter taking less than three years.^[50][51][2] One alternative to the direct trajectory was identified as using a commercial rocket, with a longer 6-year cruise time involving gravity assist maneuvers at Venus, Earth and/or Mars. Additionally, a launch on a Delta IV Heavy with a gravity assist at Venus was considered.^[113]

In July 2021 the decision was announced to launch on a Falcon Heavy rocket, in fully expendable configuration.^[9] Three reasons were given: reasonable launch cost (ca. $178 million), questionable SLS availability, and possible damage to the payload due to strong vibrations caused by the solid boosters attached to the SLS launcher.^[113] The move to Falcon Heavy saved an estimated US$2 billion in launch costs alone.^[114][115] NASA was not sure an SLS would be available for the mission since the Artemis program would use SLS rockets extensively, and the SLS's use of solid rocket boosters (SRBs) generates more vibrations in the payload than a launcher that does not use SRBs. The cost to redesign Europa Clipper for the SLS vibratory environment was estimated at US$1 billion.

Europa Clipper was launched on October 14, 2024, at 12:06 p.m. EDT from Launch Pad 39A at NASA's Kennedy Space Center in Florida.^[116] Hurricane Milton caused a launch attempt for October 10 to be scrubbed,^[117] resulting in the launch being finalized for October 14.

Animation of Europa Clipper

Around the Sun
  Europa Clipper ·    Earth ·    Jupiter ·   Sun ·   Mars

Around Jupiter
  Europa Clipper ·   Europa ·   Callisto ·   Io

The trajectory of Europa Clipper will include a gravity assist from Mars on March 1, 2025,^[10] allowing it to speed further away from the Sun, then down towards the Sun and back out, and gain additional kinetic energy from an Earth gravity assist on December 3, 2026.^[11] The probe will then arc (reach aphelion) beyond Jupiter's orbit on October 4, 2029^[118] before slowly falling into Jupiter's gravity well and executing its orbital insertion burn in April 2030.^[119]

As of 2014^[update], the trajectory in the Jupiter system is planned as follows.^{[needs update]} After entry into the Jupiter system, Europa Clipper will perform a flyby of Ganymede at an altitude of 500 km (310 mi), which will reduce the spacecraft velocity by ~400 m/s (890 mph). This will be followed by firing the main engine at a distance of 11 Rj (Jovian radii), to provide a further ~840 m/s (1,900 mph) of delta-V, sufficient to insert the spacecraft into a 202-day orbit around Jupiter. Once the spacecraft reaches the apoapsis of that initial orbit, it will perform another engine burn to provide a ~122 m/s (270 mph) periapsis raise maneuver (PRM).^{[120][needs update]}

The spacecraft's cruise and science phases will overlap with the European Space Agency's JUICE spacecraft, which was launched in April 2023 and will arrive at Jupiter in July 2031. Europa Clipper is due to arrive at Jupiter 15 months prior to JUICE, despite a launch date planned 18 months later, owing to a more powerful launch vehicle and a faster flight plan with fewer gravity assists.

To raise public awareness of the Europa Clipper mission, NASA undertook a "Message In A Bottle" campaign, i.e. an actual "Send Your Name to Europa" campaign on June 1, 2023, through which people around the world were invited to send their names as signatories to a poem called "In Praise of Mystery: A Poem for Europa" written by the U.S. Poet Laureate Ada Limón, for the 2.9-billion-kilometer (1.8-billion mi) voyage to Jupiter. The poem connects the two water worlds – Earth, yearning to reach out and understand what makes a world habitable, and Europa, waiting with secrets yet to be explored.

The poem is engraved on Europa Clipper inside a tantalum metal plate, about 7 by 11 inches (18 by 28 centimeters), that seals an opening into the vault. The inward-facing side of the metal plate is engraved with the poem in the poet's own handwriting. The public participants' names are etched onto a microchip attached to the plate, within an artwork of a wine bottle surrounded by the four Galilean moons. After registering their names, participants received a digital ticket with details of the mission's launch and destination. According to NASA, 2,620,861 people signed their names to Europa Clipper's Message in a Bottle, most of whom were from the United States.^[121] Other elements etched on the inwards side together with the poem and names are the Drake equation, representations of the spectral lines of atomic hydrogen and the hydroxyl radical, together known as the water hole, and a portrait of planetary scientist Ron Greeley.^[122] The outward-facing panel features art that highlights Earth's connection to Europa. Linguists collected recordings of the word "water" spoken in 103 languages, from families of languages around the world. The audio files were converted into waveforms and etched into the plate. The waveforms radiate out from a symbol representing the American Sign Language sign for "water".^[123] The research organization METI International gathered the audio files for the words for "water", and its president Douglas Vakoch designed the water hole component of the message.^[124][125]

• 
  The outside of the Europa Clipper commemorative plate features waveforms that are visual representations of the sound waves formed by the word "water" in 103 languages
• 
  The inside of a commemorative plate mounted on NASA's Europa Clipper spacecraft features U.S. Poet Laureate Ada Limón's handwritten "In Praise of Mystery: A Poem for Europa" (blurred for copyright reasons)

• Europa Orbiter – Cancelled NASA orbiter mission to Europa
• Europa Jupiter System Mission – Laplace – Canceled orbiter mission concept to Jupiter
• Exploration of Jupiter – Overview of the exploration of Jupiter the planet and its moons
• Galileo (spacecraft) – First NASA mission to orbit Jupiter (1989–2003)
• Jupiter Icy Moons Explorer – European mission to study Jupiter and its moons since 2023
• Jupiter Icy Moons Orbiter – Canceled NASA orbiter mission to Jupiter's icy moons
• Laplace-P – Proposed Russian spacecraft to study the Jovian moon system and land on Ganymede

• Cochrane, Corey J.; et al. (June 2023). "Magnetic Field Modeling and Visualization of the Europa Clipper Spacecraft". Space Science Reviews. 219 (4): 34. Bibcode:2023SSRv..219...34C. doi:10.1007/s11214-023-00974-y. PMC 10220138. PMID 37251605.
• Pappalardo, Robert T.; et al. (June 2024). "Science Overview of the Europa Clipper Mission". Space Science Reviews. 220 (4): 40. Bibcode:2024SSRv..220...40P. doi:10.1007/s11214-024-01070-5. ISSN 0038-6308.
• Roberts, James H.; et al. (September 2023). "Exploring the Interior of Europa with the Europa Clipper". Space Science Reviews. 219 (6): 46. Bibcode:2023SSRv..219...46R. doi:10.1007/s11214-023-00990-y. PMC 10457249. PMID 37636325.

Wikimedia Commons has media related to Europa Clipper.

• Official website
• NASA – Overview of Europa