Swiftsure-class ironclad
This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. (June 2008) |
This article needs additional citations for verification. (June 2008) |
HMS Swiftsure sometime after she was converted to barque rig during an 1879-1881 refit.
| |
Class overview | |
---|---|
Builders | Palmers Shipbuilding and Iron Company, Jarrow |
Operators | Royal Navy |
Preceded by | Audacious-class |
Built | 1868–1873 |
In commission | 1872–1921 |
Planned | 2 |
Completed | 2 |
General characteristics | |
Type | Ironclad warship |
Displacement | 6,910 long tons (7,020 t) |
Length | 280 ft (85 m) |
Beam | 55 ft (17 m) |
Draught |
|
Propulsion |
|
Sail plan | Ship-rigged, sail area 41,900 sq ft (3,890 m2) |
Speed | 14 knots (16 mph; 26 km/h) under power |
Complement | 450 |
Armament |
|
Armour |
|
The Swiftsure class battleships of the late Victorian era were broadside ironclads designed and built specifically for service as Flagships on the Pacific station.
Design
[edit]In appearance the two ships of the class, HMS Swiftsure and HMS Triumph, were very similar to HMS Audacious; under water their hulls were very similar to that of HMS Defence. The intention was to make the ships good performers under sail, while at the same time being stable ships and good gun platforms.
At the design stage it had been suggested by the Committee on Designs that the ships should be built with their artillery mounted in two turrets, with some smaller guns positioned fore and aft. As there was at that time not sufficient experience with turret-mounted armament, and none at all with turrets in first-class battleships, the idea did not find favour and this class was completed with a broadside box battery deployed on two levels, on the main and on the upper deck.
Fouling of ships' hulls by marine life had been a problem since the dawn of shipbuilding. Until the middle of the nineteenth century ships' bottoms had been sheathed with copper sheeting, which prevented fouling but was expensive. Sheathing with zinc plate or with Muntz metal was used thereafter, as it was cheaper. For the Swiftsure class, however, a reversion was made to copper sheathing, as in the Pacific there were no docking facilities whatsoever - until the completion of the dockyard at Esquimalt in 1886 - and the sheathing applied on commissioning had to serve for the whole commission.
All ranks were berthed on the main deck; berthing for seamen in previous classes had been on the lower deck. As the officers' accommodation was well ventilated and well lit, the ships were universally popular.
History
[edit]This section needs expansion. You can help by adding to it. (November 2016) |
The two ships spent some time in reserve, but in their active careers they took turns as flagship of the Pacific station.
References
[edit]- Friedman, Norman (2018). British Battleships of the Victorian Era. Annapolis, Maryland: Naval Institute Press. ISBN 978-1-68247-329-0.
- Lyon, David & Winfield, Rif (2004). The Sail & Steam Navy List: All the Ships of the Royal Navy 1815–1889. London: Chatham Publishing. ISBN 1-86176-032-9.
- Parkes, Oscar (1990) [1957]. British Battleships. Annapolis, Maryland: Naval Institute Press. ISBN 1-55750-075-4.
- Preston, Antony (1985). "Great Britain and Empire Forces". In Gray, Randal (ed.). Conway's All the World's Fighting Ships 1906–1921. Annapolis, Maryland: Naval Institute Press. pp. 1–104. ISBN 0-85177-245-5.
External links
[edit]Media related to Swiftsure class battleship (1870) at Wikimedia Commons