Soda lime

The primary components of soda lime include: calcium oxide (CaO) constituting approximately 75%, water (H
₂O) accounting for around 20%, sodium hydroxide (NaOH) making up about 3%, and potassium hydroxide (KOH) present at approximately 0.1%.

During general anaesthesia, a patient's exhaled gases, containing carbon dioxide, pass through an anaesthesia machine's breathing circuit, containing a soda lime canister filled with soda lime granules.^[1] Medical-grade soda lime includes an indicating dye that changes color when it reaches its carbon dioxide absorption capacity. To ensure proper functioning, a carbon dioxide scrubber (or soda lime canister) should not be used if the indicating dye is activated. Standard anesthesia machines typically contain up to 2 kilograms (4.4 lb) of soda lime granules.^{[citation needed]}

Recent carbon dioxide absorbents have been developed to minimize the risk of toxic by-product formation resulting from the interaction between the absorbent and inhaled anesthetics, like halothane. Some absorbents, including those made from lithium hydroxide, are available for this purpose.^{[citation needed]}

In space flights, lithium hydroxide (LiOH) is used as a carbon dioxide absorbent due to its low molecular weight (Na: 23 g/mol; Li: 7 g/mol), saving weight during launch. During the Apollo 13 flight, high carbon dioxide levels in the Lunar Module led the crew to adapt spare absorbent cartridges from the Apollo capsule to the Lunar Excursion Module (LEM) system.

Exhaled gas undergoes a crucial process: it must pass through a carbon dioxide scrubber where carbon dioxide is absorbed before the gas is circulated for breathing again. In rebreathers, this scrubber is integrated into the breathing loop.^[2][3] However, in larger settings like recompression chambers or submarines, a fan is employed to ensure a continuous flow of gas through the scrubbing canister. Notably, the use of color indicating dye in United States Navy fleet applications ceased in 1996 due to concerns about potential chemical releases into the circuit.^[4]

The overall chemical reaction is:

CO₂ + Ca(OH)₂ → CaCO₃ + H₂O + heat (in the presence of water)

Each mole of CO₂ (44 g) reacts with one mole of calcium hydroxide (74 g) and produces one mole of water (18 g).

The reaction can be considered as a strong-base-catalysed, water-facilitated reaction.^[5]

The reaction mechanism of carbon dioxide with soda lime can be decomposed in three elementary steps:

1) ${\displaystyle {\ce {CO2(g) <=>> CO2(aq)}}}$  (CO₂ dissolves in water – slow and rate-determining),

2) ${\displaystyle {\ce {CO2(aq) + NaOH -> NaHCO3}}}$  (bicarbonate formation at high pH),

3) ${\displaystyle {\ce {NaHCO3 + Ca(OH)2 -> CaCO3 + NaOH + H2O}}}$  (NaOH recycled to step 2 – hence a catalyst).

This sequence of reactions explains the catalytic role played by sodium hydroxide in the system and why soda lime is faster in chemical reactivity than calcium hydroxide alone.^[6] The moist sodium hydroxide impregnates the surface and the porosity of calcium hydroxide grains with a high specific surface area.^[7] It reacts much more quickly and so contributes to a faster elimination of the carbon dioxide from the rebreathing circuit. The formation of water by the reaction and the moisture from the respiration also act as a solvent for the reaction. Reactions in aqueous phase are generally faster than between a dry gas and a dry solid. Soda lime is commonly used in closed-circuit diving rebreathers and in the anesthesia breathing circuit in anesthesia systems.^[8][9]

The same catalytic effect by the alkali hydroxides (function of the Na₂O_eq content of cement) also contributes to the carbonation of portlandite by atmospheric CO₂ in concrete although the rate of propagation of the reaction front is there essentially limited by the carbon dioxide diffusion within the concrete matrix less porous.^[10]

A similar reaction to above, also catalysed by sodium hydroxide, is the alkali–silica reaction, a slow degradation process causing the swelling and the cracking of concrete containing aggregates rich in reactive amorphous silica. In a very similar way, sodium hydroxide greatly facilitates the dissolution of the amorphous silica. The produced sodium silicate then reacts with the calcium hydroxide (portlandite) present in the hardened cement paste to form calcium silicate hydrate (abbreviated as C-S-H in the cement chemist notation). This silicification reaction of calcium hydroxide on its turn continuously releases again sodium hydroxide in solution, maintaining a high pH, and the cycle continues up to the total disappearance of portlandite or reactive silica in the exposed concrete. Without the catalysis of this reaction by sodium- or potassium-soluble hydroxides, the alkali–silica reaction would not proceed or would be limited to a very slow pozzolanic reaction. The alkali–silica reaction can be written like the soda lime reaction, by simply substituting carbon dioxide by silica dioxide in the reactions mentioned here above as follows:

reaction 1:		SiO2 + NaOH		→		NaHSiO3		silica dissolution by NaOH: high pH
reaction 2:		NaHSiO3 + Ca(OH)2		→		CaSiO3 + H2O + NaOH		C-S-H precipitation and regeneration of NaOH
sum (1+2):		SiO2 + Ca(OH)2		→		CaSiO3 + H2O		global reaction: Pozzolanic reaction catalysed by NaOH

• Carbon dioxide scrubber
• Alkali–silica reaction
• Soda–lime glass, a type of glass made from silica, soda, lime and aluminum oxide

• Publications on sodalime in diving operations^[usurped]
• Sofnolime MSDS Example of a commercial soda lime product that is used in diving and medicine
• An Introduction to Sofnolime (Technical Article)