Bigsby vibrato tailpiece

The Bigsby vibrato tailpiece (or Bigsby for short) is a type of mechanical vibrato device for electric guitar designed by Paul Bigsby and produced by the Bigsby Electric Guitar Company[citation needed] (currently an independently operated subsidiary of Fender Musical Instruments Corporation). The device allows musicians to bend the pitch of notes or entire chords with their pick hand for various effects.[1]

Bigsby B50 Tremolo Hardware

Bigsby was inspired to create a new vibrato system after being tasked by Merle Travis to repair the Kauffman Vibrola on his Gibson L-10.[2] The Bigsby system would debut in 1951,[2] with the first example going to Travis.[3] By the mid-1950s, Bigsby had ceased production of his own guitars and began only producing a range of vibrato tailpieces.[3]

Design

edit
 
Epiphone Casino VT with Bigsby.
 
Gibson Les Paul with a Bigsby

The Bigsby vibrato unit is installed on the top of the guitar and includes a 'rocking bridge', not a 'roller bridge'. The lever arm of the Bigsby is spring-loaded and attached to a pivoting metal bar, around which the strings of the guitar are installed. In the neutral or unused position, the pressure of the spring counterbalances the pull of the strings, resulting in constant pitch when the strings are played. When the arm of the Bigsby is pushed down towards the top of the guitar, the bridge rocks forward causing the strings to loosen, lowering their pitch. When the arm is released, the strings return to normal pitch. The arm may also be lifted to raise the pitch of the strings.[2] The Bigsby is highly controllable within its range of motion and usually requires little force to operate. It is ideally suited to musicians who use slow, subtle, or extended bends. It has limited range compared to vibrato units using longer springs contained internally. Competing units, like the Floyd Rose and the Fender synchronized tremolo (or strat-style) are therefore preferred by some players.

Bigsby vibratos are still factory-installed on a variety of electric guitars, including certain instruments branded as PRS (Starla), Epiphone, Fender, Gibson, Gretsch, Guild, Hamer, Ibanez, and Schecter Guitar Research, as well as luthiers companies such as MotorAve. Many electric guitars can also be retrofitted with a Bigsby, which requires no additional routing, but may require additional holes to be drilled. Adapters, such as the models sold by Vibramate, can be used to install a Bigsby Vibrato on a guitar without drilling any holes. Variations in guitars, such as between flat top and archtop, require different models of Bigsby.

Ownership

edit

Bigsby was sold by its previous owner, Gretsch, to Fender Musical Instruments Corporation in January 2019.[3]

See also

edit

References

edit
  1. ^ Babiuk, Andy (2009). The Story of Paul Bigsby The Father of the Modern Electric Solid Body Guitar. FG Publishing. ISBN 9781476854885.
  2. ^ a b c Price, Huw (July 22, 2022). "Everything you need to know about the Bigsby vibrato". Guitarist. Retrieved August 23, 2022.
  3. ^ a b c Beckner, Justin (August 8, 2022). "The Story of Bigsby Guitars: the solidbody electric guitar's unsung hero". Guitar. Retrieved August 23, 2022.
edit