Earth radius

Earth radius
Equatorial (a), polar (b) and arithmetic mean Earth radii as defined in the 1984 World Geodetic System revision (not to scale)
Other names	terrestrial radius
Common symbols	R🜨, RE, a, b, aE, bE, ReE, RpE
SI unit	meters
In SI base units	m
Behaviour under coord transformation	scalar
Dimension	${\displaystyle {\mathsf {L}}}$
Value	Equatorial radius: a = (6378137.0 m) Polar radius: b = (6356752.3 m)

Nominal Earth radius
Cross section of Earth's Interior
General information
Unit system	astronomy, geophysics
Unit of	distance
Symbol	${\displaystyle {\mathcal {R}}_{\mathrm {E} }^{\mathrm {N} }}$, ${\displaystyle {\mathcal {R}}_{e\mathrm {E} }^{\mathrm {N} }}$, ${\displaystyle {\mathcal {R}}_{p\mathrm {E} }^{\mathrm {N} }}$
Conversions
1 ${\displaystyle {\mathcal {R}}_{\mathrm {E} }^{\mathrm {N} }}$ in ...	... is equal to ...
SI base unit	6.3781×106 m[1]
Metric system	6,357 to 6,378 km
English units	3,950 to 3,963 mi

Geodesy
Fundamentals Geodesy Geodynamics Geomatics History
Concepts Geographical distance Geoid Figure of the Earth (radius and circumference) Geodetic coordinates Geodetic datum Geodesic Horizontal position representation Latitude / Longitude Map projection Reference ellipsoid Satellite geodesy Spatial reference system Spatial relations Vertical positions
Technologies Global Nav. Sat. Systems (GNSSs) Global Pos. System (GPS) GLONASS (Russia) BeiDou (BDS) (China) Galileo (Europe) NAVIC (India) Quasi-Zenith Sat. Sys. (QZSS) (Japan) Discrete Global Grid and Geocoding
Standards (history) NGVD 29 Sea Level Datum 1929 OSGB36 Ordnance Survey Great Britain 1936 SK-42 Systema Koordinat 1942 goda ED50 European Datum 1950 SAD69 South American Datum 1969 GRS 80 Geodetic Reference System 1980 ISO 6709 Geographic point coord. 1983 NAD 83 North American Datum 1983 WGS 84 World Geodetic System 1984 NAVD 88 N. American Vertical Datum 1988 ETRS89 European Terrestrial Ref. Sys. 1989 GCJ-02 Chinese obfuscated datum 2002 Geo URI Internet link to a point 2010 International Terrestrial Reference System Spatial Reference System Identifier (SRID) Universal Transverse Mercator (UTM)
v t e

Earth radius (denoted as R_🜨 or R_E) is the distance from the center of Earth to a point on or near its surface. Approximating the figure of Earth by an Earth spheroid (an oblate ellipsoid), the radius ranges from a maximum (equatorial radius, denoted a) of nearly 6,378 km (3,963 mi) to a minimum (polar radius, denoted b) of nearly 6,357 km (3,950 mi).

A globally-average value is usually considered to be 6,371 kilometres (3,959 mi) with a 0.3% variability (±10 km) for the following reasons. The International Union of Geodesy and Geophysics (IUGG) provides three reference values: the mean radius (R₁) of three radii measured at two equator points and a pole; the authalic radius, which is the radius of a sphere with the same surface area (R₂); and the volumetric radius, which is the radius of a sphere having the same volume as the ellipsoid (R₃).^[2] All three values are about 6,371 kilometres (3,959 mi).

Other ways to define and measure the Earth's radius involve either the spheroid's radius of curvature or the actual topography. A few definitions yield values outside the range between the polar radius and equatorial radius because they account for localized effects.

A nominal Earth radius (denoted ${\displaystyle {\mathcal {R}}_{\mathrm {E} }^{\mathrm {N} }}$) is sometimes used as a unit of measurement in astronomy and geophysics, a conversion factor used when expressing planetary properties as multiples or fractions of a constant terrestrial radius; if the choice between equatorial or polar radii is not explicit, the equatorial radius is to be assumed, as recommended by the International Astronomical Union (IAU).^[1]

Earth's rotation, internal density variations, and external tidal forces cause its shape to deviate systematically from a perfect sphere.^[a] Local topography increases the variance, resulting in a surface of profound complexity. Our descriptions of Earth's surface must be simpler than reality in order to be tractable. Hence, we create models to approximate characteristics of Earth's surface, generally relying on the simplest model that suits the need.

Each of the models in common use involve some notion of the geometric radius. Strictly speaking, spheres are the only solids to have radii, but broader uses of the term radius are common in many fields, including those dealing with models of Earth. The following is a partial list of models of Earth's surface, ordered from exact to more approximate:

• The actual surface of Earth
• The geoid, defined by mean sea level at each point on the real surface^[b]
• A spheroid, also called an ellipsoid of revolution, geocentric to model the entire Earth, or else geodetic for regional work^[c]
• A sphere

In the case of the geoid and ellipsoids, the fixed distance from any point on the model to the specified center is called "a radius of the Earth" or "the radius of the Earth at that point".^[d] It is also common to refer to any mean radius of a spherical model as "the radius of the earth". When considering the Earth's real surface, on the other hand, it is uncommon to refer to a "radius", since there is generally no practical need. Rather, elevation above or below sea level is useful.

Regardless of the model, any of these geocentric radii falls between the polar minimum of about 6,357 km and the equatorial maximum of about 6,378 km (3,950 to 3,963 mi). Hence, the Earth deviates from a perfect sphere by only a third of a percent, which supports the spherical model in most contexts and justifies the term "radius of the Earth". While specific values differ, the concepts in this article generalize to any major planet.

Rotation of a planet causes it to approximate an oblate ellipsoid/spheroid with a bulge at the equator and flattening at the North and South Poles, so that the equatorial radius a is larger than the polar radius b by approximately aq. The oblateness constant q is given by

${\displaystyle q={\frac {a^{3}\omega ^{2}}{GM}}\,,}$

where ω is the angular frequency, G is the gravitational constant, and M is the mass of the planet.^[e] For the Earth ⁠1/q⁠ ≈ 289, which is close to the measured inverse flattening ⁠1/f⁠ ≈ 298.257. Additionally, the bulge at the equator shows slow variations. The bulge had been decreasing, but since 1998 the bulge has increased, possibly due to redistribution of ocean mass via currents.^[4]

The variation in density and crustal thickness causes gravity to vary across the surface and in time, so that the mean sea level differs from the ellipsoid. This difference is the geoid height, positive above or outside the ellipsoid, negative below or inside. The geoid height variation is under 110 m (360 ft) on Earth. The geoid height can change abruptly due to earthquakes (such as the Sumatra-Andaman earthquake) or reduction in ice masses (such as Greenland).^[5]

Not all deformations originate within the Earth. Gravitational attraction from the Moon or Sun can cause the Earth's surface at a given point to vary by tenths of a meter over a nearly 12-hour period (see Earth tide).

Given local and transient influences on surface height, the values defined below are based on a "general purpose" model, refined as globally precisely as possible within 5 m (16 ft) of reference ellipsoid height, and to within 100 m (330 ft) of mean sea level (neglecting geoid height).

Additionally, the radius can be estimated from the curvature of the Earth at a point. Like a torus, the curvature at a point will be greatest (tightest) in one direction (north–south on Earth) and smallest (flattest) perpendicularly (east–west). The corresponding radius of curvature depends on the location and direction of measurement from that point. A consequence is that a distance to the true horizon at the equator is slightly shorter in the north–south direction than in the east–west direction.

In summary, local variations in terrain prevent defining a single "precise" radius. One can only adopt an idealized model. Since the estimate by Eratosthenes, many models have been created. Historically, these models were based on regional topography, giving the best reference ellipsoid for the area under survey. As satellite remote sensing and especially the Global Positioning System gained importance, true global models were developed which, while not as accurate for regional work, best approximate the Earth as a whole.

The following radii are derived from the World Geodetic System 1984 (WGS-84) reference ellipsoid.^[6] It is an idealized surface, and the Earth measurements used to calculate it have an uncertainty of ±2 m in both the equatorial and polar dimensions.^[7] Additional discrepancies caused by topographical variation at specific locations can be significant. When identifying the position of an observable location, the use of more precise values for WGS-84 radii may not yield a corresponding improvement in accuracy.^{[clarification needed]}

The value for the equatorial radius is defined to the nearest 0.1 m in WGS-84. The value for the polar radius in this section has been rounded to the nearest 0.1 m, which is expected to be adequate for most uses. Refer to the WGS-84 ellipsoid if a more precise value for its polar radius is needed.

• The Earth's equatorial radius a, or semi-major axis,^[8]: 11 is the distance from its center to the equator and equals 6,378.1370 km (3,963.1906 mi).^[9] The equatorial radius is often used to compare Earth with other planets.

• The Earth's polar radius b, or semi-minor axis^[8]: 11 is the distance from its center to the North and South Poles, and equals 6,356.7523 km (3,949.9028 mi).

The geocentric radius is the distance from the Earth's center to a point on the spheroid surface at geodetic latitude φ, given by the formula: ^[10]

${\displaystyle R(\varphi )={\sqrt {\frac {(a^{2}\cos \varphi )^{2}+(b^{2}\sin \varphi )^{2}}{(a\cos \varphi )^{2}+(b\sin \varphi )^{2}}}},}$

where a and b are, respectively, the equatorial radius and the polar radius.

The extrema geocentric radii on the ellipsoid coincide with the equatorial and polar radii. They are vertices of the ellipse and also coincide with minimum and maximum radius of curvature.

There are two principal radii of curvature: along the meridional and prime-vertical normal sections.

In particular, the Earth's meridional radius of curvature (in the north–south direction) at φ is:^[11]

${\displaystyle M(\varphi )={\frac {(ab)^{2}}{{\big (}(a\cos \varphi )^{2}+(b\sin \varphi )^{2}{\big )}^{\frac {3}{2}}}}={\frac {a(1-e^{2})}{(1-e^{2}\sin ^{2}\varphi )^{\frac {3}{2}}}}={\frac {1-e^{2}}{a^{2}}}N(\varphi )^{3}\,.}$

where ${\displaystyle e}$ is the eccentricity of the earth. This is the radius that Eratosthenes measured in his arc measurement.

If one point had appeared due east of the other, one finds the approximate curvature in the east–west direction.^[f]

This Earth's prime-vertical radius of curvature, also called the Earth's transverse radius of curvature, is defined perpendicular (orthogonal) to M at geodetic latitude φ^[g] and is:^[11]

${\displaystyle N(\varphi )={\frac {a^{2}}{\sqrt {(a\cos \varphi )^{2}+(b\sin \varphi )^{2}}}}={\frac {a}{\sqrt {1-e^{2}\sin ^{2}\varphi }}}\,.}$

N can also be interpreted geometrically as the normal distance from the ellipsoid surface to the polar axis.^[12] The radius of a parallel of latitude is given by ${\displaystyle p=N\cos(\varphi )}$.^[13][14]

The Earth's meridional radius of curvature at the equator equals the meridian's semi-latus rectum:

M_e=⁠b²/a⁠ = 6,335.439 km

The Earth's prime-vertical radius of curvature at the equator equals the equatorial radius, N_e = a.

The Earth's polar radius of curvature (either meridional or prime-vertical) is:

M_p=N_p=⁠a²/b⁠ = 6,399.594 km

The Earth's azimuthal radius of curvature, along an Earth normal section at an azimuth (measured clockwise from north) α and at latitude φ, is derived from Euler's curvature formula as follows:^[16]: 97

${\displaystyle R_{\mathrm {c} }={\frac {1}{{\dfrac {\cos ^{2}\alpha }{M}}+{\dfrac {\sin ^{2}\alpha }{N}}}}\,.}$

It is possible to combine the principal radii of curvature above in a non-directional manner.

The Earth's Gaussian radius of curvature at latitude φ is:^[16]

${\displaystyle R_{\mathrm {a} }(\varphi )={\frac {1}{\sqrt {K}}}={\frac {1}{2\pi }}\int _{0}^{2\pi }R_{\mathrm {c} }(\alpha )\,d\alpha \,={\sqrt {MN}}={\frac {a^{2}b}{(a\cos \varphi )^{2}+(b\sin \varphi )^{2}}}={\frac {a{\sqrt {1-e^{2}}}}{1-e^{2}\sin ^{2}\varphi }}\,.}$

Where K is the Gaussian curvature, ${\displaystyle K=\kappa _{1}\,\kappa _{2}={\frac {\det \,B}{\det \,A}}}$.

The Earth's mean radius of curvature at latitude φ is:^[16]: 97

${\displaystyle R_{\mathrm {m} }={\frac {2}{{\dfrac {1}{M}}+{\dfrac {1}{N}}}}\,\!}$

The Earth can be modeled as a sphere in many ways. This section describes the common ways. The various radii derived here use the notation and dimensions noted above for the Earth as derived from the WGS-84 ellipsoid;^[6] namely,

Equatorial radius: a = (6378.1370 km)

Polar radius: b = (6356.7523 km)

A sphere being a gross approximation of the spheroid, which itself is an approximation of the geoid, units are given here in kilometers rather than the millimeter resolution appropriate for geodesy.

In geophysics, the International Union of Geodesy and Geophysics (IUGG) defines the Earth's arithmetic mean radius (denoted R₁) to be^[2]

${\displaystyle R_{1}={\frac {2a+b}{3}}\,\!}$

The factor of two accounts for the biaxial symmetry in Earth's spheroid, a specialization of triaxial ellipsoid. For Earth, the arithmetic mean radius is 6,371.0088 km (3,958.7613 mi).^[17]

Earth's authalic radius (meaning "equal area") is the radius of a hypothetical perfect sphere that has the same surface area as the reference ellipsoid. The IUGG denotes the authalic radius as R₂.^[2] A closed-form solution exists for a spheroid:^[8]

${\displaystyle R_{2}={\sqrt {{\frac {1}{2}}\left(a^{2}+{\frac {b^{2}}{e}}\ln {\frac {1+e}{b/a}}\right)}}={\sqrt {{\frac {a^{2}}{2}}+{\frac {b^{2}}{2}}{\frac {\tanh ^{-1}e}{e}}}}={\sqrt {\frac {A}{4\pi }}}\,,}$

where ⁠${\displaystyle \textstyle e={\sqrt {a^{2}-b^{2}}}{\big /}a}$⁠ is the eccentricity and ⁠${\displaystyle A}$⁠ is the surface area of the spheroid.

For the Earth, the authalic radius is 6,371.0072 km (3,958.7603 mi).^[17]

The authalic radius ${\displaystyle R_{2}}$ also corresponds to the radius of (global) mean curvature, obtained by averaging the Gaussian curvature, ${\displaystyle K}$, over the surface of the ellipsoid. Using the Gauss–Bonnet theorem, this gives

${\displaystyle {\frac {\int K\,dA}{A}}={\frac {4\pi }{A}}={\frac {1}{R_{2}^{2}}}.}$

Another spherical model is defined by the Earth's volumetric radius, which is the radius of a sphere of volume equal to the ellipsoid. The IUGG denotes the volumetric radius as R₃.^[2]

${\displaystyle R_{3}={\sqrt[{3}]{a^{2}b}}\,.}$

For Earth, the volumetric radius equals 6,371.0008 km (3,958.7564 mi).^[17]

Another global radius is the Earth's rectifying radius, giving a sphere with circumference equal to the perimeter of the ellipse described by any polar cross section of the ellipsoid. This requires an elliptic integral to find, given the polar and equatorial radii:

${\displaystyle M_{\mathrm {r} }={\frac {2}{\pi }}\int _{0}^{\frac {\pi }{2}}{\sqrt {{a^{2}}\cos ^{2}\varphi +{b^{2}}\sin ^{2}\varphi }}\,d\varphi \,.}$

The rectifying radius is equivalent to the meridional mean, which is defined as the average value of M:^[8]

${\displaystyle M_{\mathrm {r} }={\frac {2}{\pi }}\int _{0}^{\frac {\pi }{2}}\!M(\varphi )\,d\varphi \,.}$

For integration limits of [0,⁠π/2⁠], the integrals for rectifying radius and mean radius evaluate to the same result, which, for Earth, amounts to 6,367.4491 km (3,956.5494 mi).

The meridional mean is well approximated by the semicubic mean of the two axes,^{[citation needed]}

${\displaystyle M_{\mathrm {r} }\approx \left({\frac {a^{\frac {3}{2}}+b^{\frac {3}{2}}}{2}}\right)^{\frac {2}{3}}\,,}$

which differs from the exact result by less than 1 μm (4×10⁻⁵ in); the mean of the two axes,

${\displaystyle M_{\mathrm {r} }\approx {\frac {a+b}{2}}\,,}$

about 6,367.445 km (3,956.547 mi), can also be used.

The mathematical expressions above apply over the surface of the ellipsoid. The cases below considers Earth's topography, above or below a reference ellipsoid. As such, they are topographical geocentric distances, R_t, which depends not only on latitude.

• Maximum R_t: the summit of Chimborazo is 6,384.4 km (3,967.1 mi) from the Earth's center.
• Minimum R_t: the floor of the Arctic Ocean is 6,352.8 km (3,947.4 mi) from the Earth's center.^[18]

The topographical mean geocentric distance averages elevations everywhere, resulting in a value 230 m larger than the IUGG mean radius, the authalic radius, or the volumetric radius. This topographical average is 6,371.230 km (3,958.899 mi) with uncertainty of 10 m (33 ft).^[19]

Earth's diameter is simply twice Earth's radius; for example, equatorial diameter (2a) and polar diameter (2b). For the WGS84 ellipsoid, that's respectively:

• 2a = 12,756.2740 km (7,926.3812 mi),
• 2b = 12,713.5046 km (7,899.8055 mi).

Earth's circumference equals the perimeter length. The equatorial circumference is simply the circle perimeter: C_e=2πa, in terms of the equatorial radius, a. The polar circumference equals C_p=4m_p, four times the quarter meridian m_p=aE(e), where the polar radius b enters via the eccentricity, e=(1−b²/a²)^0.5; see Ellipse#Circumference for details.

Arc length of more general surface curves, such as meridian arcs and geodesics, can also be derived from Earth's equatorial and polar radii.

Likewise for surface area, either based on a map projection or a geodesic polygon.

Earth's volume, or that of the reference ellipsoid, is V = ⁠4/3⁠πa²b. Using the parameters from WGS84 ellipsoid of revolution, a = 6,378.137 km and b = 6356.7523142 km, V = 1.08321×10¹² km³ (2.5988×10¹¹ cu mi).^[20]

In astronomy, the International Astronomical Union denotes the nominal equatorial Earth radius as ${\displaystyle {\mathcal {R}}_{e\mathrm {E} }^{\mathrm {N} }}$, which is defined to be exactly 6,378.1 km (3,963.2 mi).^[1]: 3 The nominal polar Earth radius is defined exactly as ${\displaystyle {\mathcal {R}}_{p\mathrm {E} }^{\mathrm {N} }}$ = 6,356.8 km (3,949.9 mi). These values correspond to the zero Earth tide convention. Equatorial radius is conventionally used as the nominal value unless the polar radius is explicitly required.^[1]: 4 The nominal radius serves as a unit of length for astronomy. (The notation is defined such that it can be easily generalized for other planets; e.g., ${\displaystyle {\mathcal {R}}_{p\mathrm {J} }^{\mathrm {N} }}$ for the nominal polar Jupiter radius.)

This table summarizes the accepted values of the Earth's radius.

Agency	Description	Value (in meters)	Ref
IAU	nominal "zero tide" equatorial	6378100	[1]
IAU	nominal "zero tide" polar	6356800	[1]
IUGG	equatorial radius	6378137	[2]
IUGG	semiminor axis (b)	6356752.3141	[2]
IUGG	polar radius of curvature (c)	6399593.6259	[2]
IUGG	mean radius (R1)	6371008.7714	[2]
IUGG	radius of sphere of same surface (R2)	6371007.1810	[2]
IUGG	radius of sphere of same volume (R3)	6371000.7900	[2]
NGA	WGS-84 ellipsoid, semi-major axis (a)	6378137.0	[6]
NGA	WGS-84 ellipsoid, semi-minor axis (b)	6356752.3142	[6]
NGA	WGS-84 ellipsoid, polar radius of curvature (c)	6399593.6258	[6]
NGA	WGS-84 ellipsoid, Mean radius of semi-axes (R1)	6371008.7714	[6]
NGA	WGS-84 ellipsoid, Radius of Sphere of Equal Area (R2)	6371007.1809	[6]
NGA	WGS-84 ellipsoid, Radius of Sphere of Equal Volume (R3)	6371000.7900	[6]
	GRS 80 semi-major axis (a)	6378137.0
	GRS 80 semi-minor axis (b)	≈6356752.314140
	Spherical Earth Approx. of Radius (RE)	6366707.0195	[21]
	meridional radius of curvature at the equator	6335439
	Maximum (the summit of Chimborazo)	6384400	[18]
	Minimum (the floor of the Arctic Ocean)	6352800	[18]
	Average distance from center to surface	6371230±10	[19]

The first published reference to the Earth's size appeared around 350 BC, when Aristotle reported in his book On the Heavens^[22] that mathematicians had guessed the circumference of the Earth to be 400,000 stadia. Scholars have interpreted Aristotle's figure to be anywhere from highly accurate^[23] to almost double the true value.^[24] The first known scientific measurement and calculation of the circumference of the Earth was performed by Eratosthenes in about 240 BC. Estimates of the error of Eratosthenes's measurement range from 0.5% to 17%.^[25] For both Aristotle and Eratosthenes, uncertainty in the accuracy of their estimates is due to modern uncertainty over which stadion length they meant.

Around 100 BC, Posidonius of Apamea recomputed Earth's radius, and found it to be close to that by Eratosthenes,^[26] but later Strabo incorrectly attributed him a value about 3/4 of the actual size.^[27] Claudius Ptolemy around 150 AD gave empirical evidence supporting a spherical Earth,^[28] but he accepted the lesser value attributed to Posidonius. His highly influential work, the Almagest,^[29] left no doubt among medieval scholars that Earth is spherical, but they were wrong about its size.

By 1490, Christopher Columbus believed that traveling 3,000 miles west from the west coast of the Iberian Peninsula would let him reach the eastern coasts of Asia.^[30] However, the 1492 enactment of that voyage brought his fleet to the Americas. The Magellan expedition (1519–1522), which was the first circumnavigation of the World, soundly demonstrated the sphericity of the Earth,^[31] and affirmed the original measurement of 40,000 km (25,000 mi) by Eratosthenes.

Around 1690, Isaac Newton and Christiaan Huygens argued that Earth was closer to an oblate spheroid than to a sphere. However, around 1730, Jacques Cassini argued for a prolate spheroid instead, due to different interpretations of the Newtonian mechanics involved.^[32] To settle the matter, the French Geodesic Mission (1735–1739) measured one degree of latitude at two locations, one near the Arctic Circle and the other near the equator. The expedition found that Newton's conjecture was correct:^[33] the Earth is flattened at the poles due to rotation's centrifugal force.

• Merrifield, Michael R. (2010). "${\displaystyle R_{\oplus }}$ The Earth's Radius (and exoplanets)". Sixty Symbols. Brady Haran for the University of Nottingham.