வார்ப்புரு:Infobox Protected area

Yosemite National Park
Yosemite National Park
	ஐயுசிஎன் வகை II (தேசிய வனம்)
	Yosemite Valley from Tunnel View
அமைவிடம்	கலிபோர்னியா, United States
அருகாமை நகரம்	Mariposa
பரப்பளவு	761,266 ஏக்கர்கள் (308,073 ha)
நிறுவப்பட்டது	அக்டோபர் 1, 1890
வருகையாளர்கள்	3,280,911 (in 2004)
நிருவாக அமைப்பு	National Park Service
உலகப் பாரம்பரியக் களம்	1984
	www.nps.gov/yose/

Ku-ring-gai Chase National Park
Ku-ring-gai Chase National Park
	ஐயுசிஎன் வகை II (தேசிய வனம்)
	Lua error in Module:Location_map at line 425: No value was provided for longitude.
அமைவிடம்	நியூ சவுத் வேல்ஸ், Australia
அருகாமை நகரம்	சிட்னி
பரப்பளவு	154 km2 (59 sq mi)
நிறுவப்பட்டது	அக்டோபர் 1, 1967
வருகையாளர்கள்	2 million (in 2001)
நிருவாக அமைப்பு	National Parks and Wildlife Service (New South Wales)

Template documentation[view] [edit] [history] [purge]

This template can be used to generate an infobox for a protected area. It is part of the Protected areas WikiProject.

Usage

These selected parameters can be used to form a completely functional infobox and the extra parameters listed below can also be added. This markup can be pasted into a new article. See below for working examples.

Basic usage

{{Infobox protected area
| name = 
| alt_name = 
| iucn_category = 
| photo = 
| photo_alt = 
| photo_caption = 
| photo_width = 
| map = 
| map_alt = 
| map_caption = 
| map_width = 
| relief =
| label =
| label_position =
| mark =
| marker_size =
| location = 
| nearest_city = 
| lat_d = 
| lat_m = 
| lat_s = 
| lat_NS = 
| long_d = 
| long_m = 
| long_s = 
| long_EW = 
| coords = 
| coords_ref = 
| region = 
| area = 
| designation =
| authorized =
| created =
| established = 
| designated =
| visitation_num = 
| visitation_year = 
| visitation_ref =
| governing_body = 
| administrator =
| operator =
| owner =
| world_heritage_site =
| website = 
| url = 
| child = 
| embedded = 
}}

Full code

Full syntax

{{Infobox protected area
| name = 
| alt_name = 
| iucn_category = 
| photo = 
| photo_alt = 
| photo_caption = 
| photo_width = 
| map = 
| map_alt = 
| map_caption = 
| map_width = 
| relief =
| label =
| label_position =
| mark =
| marker_size =
| location = 
| nearest_city = 
| nearest_town =
| lat_d = 
| lat_m = 
| lat_s = 
| lat_NS = 
| long_d = 
| long_m = 
| long_s = 
| long_EW = 
| x =
| y =
| x% =
| y% =
| type =
| region =
| scale =
| source =
| display =
| format =
| coords = 
| coords_ref = 
| area = 
| area_ha =
| area_acre =
| area_km2 =
| area_sqmi =
| designation =
| authorized =
| created =
| established = 
| designated =
| visitation_num = 
| visitation_year = 
| visitation_ref =
| governing_body = 
| administrator =
| operator =
| owner =
| world_heritage_site =
| website = 
| url = 
| child = 
| embedded = 
| embedded1 =
| embedded2 =
}}

Parameter descriptions

This table describes all parameters which can be used in building infoboxes. Only the name parameter must be assigned a value.

Field name	Description
`name`	Required. The official name of the protected area. It will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is Mount Washington (New Hampshire) then `name=Mount Washington`.
`alt_name`	If there is a common English name for the area use for the `name` parameter. This parameter can be used to display the name in the local language or for an alternate English name if it is commonly used. If you would like to italicize the text use wiki markup.
`iucn_category`	Strongly recommended. The IUCN category associated with the protected area. Valid values are Ia, Ib, II, III, IV, V, or VI. See IUCN Categories.
`photo`	The name of an image file to be displayed. No special formatting is needed.
`photo_width`	Can be used to change the display width the image. The default and maximum value is 284px. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) may need to be adjusted to 180px or 220px. For example `photo_width=200` and not `photo_width=200px`.
`photo_alt`	Alt text for the photo, for visually impaired readers. See WP:ALT.
`photo_caption`	The caption which will appear below the image if one is required.
`map`	The name of the map to be displayed. See Map display methods.
`map_width`	Width to display the map image in pixels. The default and maximum is 284, but usually the map should be much smaller. For example: `map_width=200` (not `map_width=200px`). If a location map template is used the map size might be scaled automatically if no width is specified.
`map_alt`	Alternative text for the map inage, see WP:ALT.
`map_caption`	Text to be displayed below the map image, if required.
`relief`	When the geographical coordinates method is used (see Map display methods), any non-blank value (`yes`, `1`, etc.) will cause the template to display a relief map image, where available. For additional information, see வார்ப்புரு:Location map#Relief parameter.
`label`	A text message that will be displayed next to the marker. Works with `label_position` below.
`label_position`	Specifies the position of a label with respect to the marker. This is not functional when using the XY method for map display. It must be assigned a value or no label will not display. Valid values are `left`, `right`, `top` and `bottom`. See `label` above.
`mark`	The image to use for the marker. The default is Red pog.svg, unless `map=us locator blank.svg` in which case the default is Green pog.svg. See வார்ப்புரு:Infobox map#Marks for more information.
`marker_size`	The display width of the marker image in pixels. The default value is 8.
`location`	The location of the protected area. Don't be too precise. County, state and country are good in the USA. If the area is within a city specify the city, state and country. If the area is in multiple counties just list the state and country. For areas in other countries adjust accordingly.
`nearest_city nearest_town`	Recommended if the area is not within a city or town. It could be a city with a major airport or a large gateway town where supplies and lodging are available. Use the most appropriate parameter.
`coords`	For the {{Coord}} template. Will not generate a marker on a map. See below. When this option is used the `type`, `region`, `scale`, `source`, `format` and `display` parameters are not functional but this data can be entered in the {{Coord}} template. The defaults should be `type:landmark` and `display:inline,title`.
`lat_d`	The degrees of latitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified.
`lat_m`	The minutes of latitude.
`lat_s`	The seconds of latitude.
`lat_NS`	N if north of the equator, S if south of the equator. Other values will be disregarded.
`long_d`	The degrees of longitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified.
`long_m`	The minutes of longitude.
`long_s`	The seconds of longitude.
`long_EW`	E if east of the prime meridian, W if west of the prime meridian. Other values will be disregarded.
`coords_ref`	Can be used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using `<ref>...</ref>` tags.
`type`	Type is one way to specify the scale of maps generated by external map websites. See type for valid values. The default value is `landmark`. If no type is appropriate consider using the `scale` parameter below.
`scale`	Determines the zoom factor for external map websites. See scale. The value is 1:10,000 for the default type which is `landmark`. Using `scale=50000` will change the zoom to 1:50,000.
`region`	A country code. See ISO 3166-2:US, ஐ. எசு. ஓ.3166-2 and ISO 3166-1 alpha-2. For example US-OR is the code for Oregon. This computer readable code is recommended. It will not be displayed. See region.
`source`	Source of the coordinate data. See source. For example GNIS or NGS, etc. It will not be displayed. Not all possible values are recognized.
`format`	Determines the format of the coordinates displayed. Valid values are `dms` for degrees, minutes and seconds, and `dec` for decimal degrees. The default value is `dms`.
`display`	Determines where the coordinates will be displayed. Valid values are `inline` and `inline,title` and their variants. The default is `inline,title` and is recommended.
`x` `y`	Specifies the position of the location marker on a map image. The coordinates of the marker in pixels based on a map with a width of 1000 pixels. The template will scale these values for proper display. See below.
`x%` `y%`	Specifies the position of the location marker on a map image. `x%` specifies the percentage of the distance across the image from the left edge and `y%` specifies the percentage of the distance down from the top edge. See below.
`area`	Area of the protected area. Usually in acres or square miles for US locations and hectares or square kilometres elsewhere. The {{Convert}} template should be used. Very small areas might be specified in square feet, square yards or square metres.
`designation`
`authorized created established designated`	The date the protected area was created. See below. Use {{Start date}}. For example, for Yosemite National Park, use {{Start date\|1890\|10\|1}}.
`visitation_num`	The number of visitors in a recent year if known.
`visitation_year`	The year during which the number of visitors was counted.
`visitation_ref`	Used with the visitation parameters above. Highly recommended. Specify the a citation for the visitation data using `<ref>...</ref>` tags.
`governing_body administrator operator owner`	The agency or organization which controls or owns the protected area. See below.
`world_heritage_site`	The year the protected area was designated a உலகப் பாரம்பரியக் களம். Few areas have this designation. If the article uses {{Infobox World Heritage Site}} then this parameter should not be used.
`website`	The full URL of the official website with no formatting. For example: `http://www.example.org/`.
`url`	Displays a url with no label.
`child`	Set to "yes" if this infobox is embedded inside another infobox.
`embedded`	Another infobox to place within this infobox. It will show up at the bottom. It needs to have its "embed" or "child" parameter set to 1 or yes, as appropriate.

Alternate parameters

A few cells allow alternate parameter names which can be used to generate an appropriate label. Editors should probably not be overly concerned with using the correct label unless using the wrong label would be a blatant error.

Protected areas are often created as the result of a governmental procedure. For example, in the United States, national parks are established by an act of congress, National Monuments are usually created by presidential proclamation, and wilderness areas are designated by an act of congress. National Park Service Affiliated Areas are authorized.

authorized → Authorized

created → Created

designated → Designated

established → Established

Some areas are privately owned, and it might be inappropriate to use the label Governing body. For example, the Aleutian World War II National Historic Area is affiliated with the National Park Service but is owned by the Ounalashka Corporation. Chimney Rock National Historic Site is operated by Nebraska State Historical Society.

governing_body → Governing body

administrator → Administrator

operator → Operator

owner → Owner

IUCN Categories

Depending on the value of the iucn_category parameter, one of the following banners will be displayed below the name. Valid values are Ia, Ib, II, III, IV, V and VI. For more information read the பாதுகாக்கப்பட்ட பகுதிகளுக்கான உலக ஆணையம் article,

ஐயுசிஎன் வகை Iஏ (Strict Nature Reserve)

ஐயுசிஎன் வகை Iபி (Wilderness Area)

ஐயுசிஎன் வகை II (தேசிய வனம்)

ஐயுசிஎன் வகை III (இயற்கை நினைவகம்)

ஐயுசிஎன் வகை IV (வாழ்விடம்/இனங்களின் மேலாண்மைப் பகுதி)

ஐயுசிஎன் வகை V (Protected Landscape/Seascape)

ஐயுசிஎன் வகை VI (Managed Resource Protected Area)

Coordinate syntax

See Template:Infobox map/coordinate syntax.

Examples

With map only

{{Infobox protected area
| name = Ku-ring-gai Chase National Park
| iucn_category = II
| map = Australia
| relief = yes
| map_width = 200
| map_alt = A map showing the location of the park on the east coast of Australia
| location = [[நியூ சவுத் வேல்ஸ்]], Australia
| nearest_city = [[சிட்னி]]
| lat_d = 33 | lat_m = 39 | lat_s = 3.6 | lat_NS = S
| long_d = 151 | long_m = 12 | long_s = 3.6 | long_EW = E
| region = AU
| area = {{convert|154|km2|abbr=on}}
| established = {{start date|1967|10|1}}
| visitation_num = 2 million
| visitation_year = 2001
| governing_body = [[National Parks and Wildlife Service (New South Wales)]]
}}

With photograph only

{{Infobox protected area
| name = Yosemite National Park
| iucn_category = II
| photo = Tunnel View, Yosemite Valley, Yosemite NP - Diliff.jpg
| photo_alt = Mountain valley with sheer cliff on its left side, and a waterfall cascading into its right, with a clear blue sky above and many green trees below
| photo_caption = Yosemite Valley from Tunnel View
| location = [[கலிபோர்னியா]], United States
| nearest_city = [[Mariposa, California|Mariposa]]
| lat_d = 37 | lat_m = 43 | lat_s = 44 | lat_NS = N 
| long_d = 119 | long_m = 35 | long_s = 54 | long_EW = W
| region = US-CA
| scale = 300000
| area = {{convert|761266|acres|0}}
| established = {{start date|1890|10|1}}
| visitation_num = 3,280,911
| visitation_year = 2004
| governing_body = [[National Park Service]]
| world_heritage_site = 1984
| url = http://www.nps.gov/yose/
}}

With no photograph or map

Harz National Park
Nationalparkverwaltung Harz
ஐயுசிஎன் வகை II (தேசிய வனம்)
அமைவிடம்	Lower Saxony and Saxony-Anhalt, Germany
ஆள்கூறுகள்	51°47′00″N 10°34′00″E / 51.78333°N 10.56667°E / 51.78333; 10.56667
பரப்பளவு	8,900 எக்டேர்கள் (21,992 ஏக்கர்கள்)
நிறுவப்பட்டது	1990, 1994, 2006
நிருவாக அமைப்பு	Nationalparkverwaltung Harz

{{Infobox protected area
| name            = Harz National Park
| alt_name        = ''Nationalparkverwaltung Harz''
| iucn_category   = II
| location        = [[Lower Saxony]] and [[Saxony-Anhalt]], Germany
| nearest_city    = 
| coords          = {{coord|51|47|00|N|10|34|00|E|region:DE_type:landmark}}
| area            = {{convert|8900|ha}}
| established     = 1990, 1994, 2006
| visitation_num  = 
| visitation_year = 
| governing_body  = Nationalparkverwaltung Harz
}}

With photograph and map

Dry Island Buffalo Jump Provincial Park
ஐயுசிஎன் வகை III (இயற்கை நினைவகம்)
Panoramic view
Lua error in Module:Location_map at line 425: No value was provided for longitude.
அமைவிடம்	ஆல்பர்ட்டா, Canada
அருகாமை நகரம்	Three Hills
பரப்பளவு	34.5 km² (13 sq mi)
நிறுவப்பட்டது	திசம்பர் 15, 1970 (1970-12-15)
நிருவாக அமைப்பு	Alberta Tourism, Parks and Recreation

{{Infobox protected area
| name = Dry Island Buffalo Jump Provincial Park
| photo = Dry Island Provincial Park2.jpg
| photo_alt = A green valley with a river and a road running somewhat parallel to the river
| photo_caption = Panoramic view
| photo_width = 260
| iucn_category = III
| map = Canada Alberta
| map_alt = Location the park in south central Alberta, Canada
| map_caption = Map of Alberta, Canada
| relief = yes 
| map_width = 200
| location = [[ஆல்பர்ட்டா]], Canada
| nearest_city = [[Three Hills, Alberta|Three Hills]]
| lat_d = 51 | lat_m = 56 | lat_s = 10 | lat_NS = N
| long_d = 112 | long_m = 57 | long_s = 41 | long_EW = W
| coords_ref = 
| region = CA
| area = {{convert|34.5|km2|0|abbr=on}}
| established = {{start date|1970|12|15}}
| governing_body = [[Alberta Tourism, Parks and Recreation]]
}}

With embedded alternate map

Black Forest National Park
ஐயுசிஎன் வகை II (தேசிய வனம்)
Lua error in Module:Location_map at line 525: Unable to find the specified location map definition: "Module:Location map/data/Nationalpark-Schwarzwald-Lageplan.png" does not exist.
அமைவிடம்	பாடன்-வுயர்ட்டம்பெர்கு, Germany
class=notpageimage\| Black Forest National Park in the southwest of the map

{{Infobox protected area
| name = Black Forest National Park
| iucn_category = II
| map = Nationalpark-Schwarzwald-Lageplan.png
| map_alt = 
| map_caption = Location of the Black Forest National Park in the northwestern Black Forest
| map_width = 
| relief =
| location = [[பாடன்-வுயர்ட்டம்பெர்கு]], Germany
| lat_d = 48 | lat_m = 33 | lat_s = 40 | lat_NS = N
| long_d = 8 | long_m = 13 | long_s = 17 | long_EW = E
| region = DE-BW
| embedded = {{Location map | Germany
 | AlternativeMap = Karte Nationalparks Deutschland high.png
 | caption = Black Forest National Park in the southwest of the map
 | lat_deg = 48 | lat_min = 33 | lat_sec = 40 | lat_dir = N
 | lon_deg = 8 | lon_min = 13 | lon_sec = 17 | lon_dir = E
 | border = none
 | width = 300
 }}
}}

Map display methods

Any image of a map showing the location of the protected area can be used. There are three methods by which maps showing a marker can be generated. வார்ப்புரு:Infobox map/Map display methods

TemplateData

No description.

Template parameters[Edit template data]
Parameter		Description	Type	Status
name	`Name`	Name of protected area	String	required
alt_name	`Alternative Name`	Common name for the protected area	String	optional
iucn_category	`IUCN Category`	IUCN Category associated with the protected area	String	optional
photo	`Photo`	Image for the protected area	Page name	optional
photo_width	`Photo Width`	Width of the image given by photo	Number	optional
photo_alt	`Photo Alternative Text`	Alternative text to be displayed if image doesn't appear for any reason	String	optional
photo_caption	`Photo Caption`	Caption for the photo	String	optional
map	`Map`	Map for the protected area	Page name	optional
map_alt	`Map Alternative Text`	Alternative text to display if the map doesn't display for whatever reasons	String	optional
map_caption	`Map Caption`	Caption for the map	String	optional
map_width	`Map Width`	Width of the map	Number	optional
relief	`Relief`	When the geographical coordinates method is used, any non-blank value will cause the template to display a relief map image	String	optional
location	`Location`	Location of the protected area	String	optional
nearest_city	`Nearest City`	Nearest city from the protected area	String	optional
lat_d	`Latitude(Degrees)`	Degrees of latitude of protected area	Number	optional
lat_m	`Latitude(Minutes)`	Minutes of latitude of protected area	Number	optional
lat_s	`Latitude(Seconds)`	Seconds of latitude of protected area	Number	optional
lat_NS	`Latitude(North/South)`	N if protected area is north of equator, S if protected area is south of equator	String	optional
long_d	`Longitude(Degrees)`	Degrees of longitude of protected area	Number	optional
long_m	`Longitude(Minutes)`	Minutes of longitude of protected area	Number	optional
long_s	`Longitude(Seconds)`	Seconds of longitude of protected area	Number	optional
long_EW	`Longitude(East/West)`	E if protected area is East of the prime meridian, W if protected area is west of the prime meridian	String	optional
coords	`Coordinates`	When this option is used the type, region, scale, source, format and display parameters are not functional but this data can be entered in the {{Coord}} template. Default type:landmark display:inline,title	String	optional
coords_ref	`Coordinates Reference`	Can be used with either coordinate display method above	String	optional
type	`Type`	Type is one way to specify the scale of maps generated by external map websites Default landmark	String	optional
scale	`Scale`	Determines the zoom factor for external map websites.	String	optional
region	`Region`	Country code in which the protected area is located	String	optional
source	`Source`	Source of the coordinate data of the protected area	String	optional
format	`Format`	dms for degrees, minutes and seconds, and dec for decimal degrees Default dms	String	optional
area	`Area`	Area Covered by protected area	Number	optional
display	`Display`	Determines where the coordinates will be displayed Default inline,title	String	optional
established	`Established`	The date on which the protected area was created	Line	optional
visitation_num	`Visitation Number`	Number of visitors in a recent year	Line	optional
visitation_year	`Visitation Year`	The year in which visitors were counted	Line	optional
visitation_ref	`Visitation Reference`	Reference of visitation data in <ref > </ref>	String	optional
governing_body	`Governing Body`	The agency or organization which controls or owns the protected area	String	optional
world_heritage_site	`World Heritage Site`	The year the protected area was designated a World Heritage Site	Line	optional
url	`Url`	The full URL of the official website with no formatting	String	optional
child	`Child`	Yes if infobox is embedded inside another infobox	String	optional
embedded	`Embedded`	Another infobox to place within this infobox	String	optional

Microformat

The articles created using this template include an hCard microformat. For more information read this.

The above documentation is transcluded from வார்ப்புரு:Infobox Protected area/doc.
Editors can experiment in this template's sandbox and testcases pages.
Add categories to the /doc subpage. Subpages of this template.