Fuse plug

A fuse plug is a collapsible dam installed on spillways in dams to increase the dam's capacity.

The principle behind the fuse plug is that the majority of water that overflows a dam's spillway can be safely dammed except in high flood conditions. The fuse plug may be a sand-filled container, a steel structure or a concrete block. Under normal flow conditions the water will spill over the fuse plug and down the spillway. In high flood conditions, where the water velocity may be so high that the dam itself may be put in danger, the fuse plug simply washes away, and the flood waters safely spill over the dam.^[1]

Fuse plugs are used in many dams throughout the world. For example, the Warragamba Dam in New South Wales has fuse plugs that are approximately 14m high.^[2]

References

^ Options for the Next ACT Water Source, ACTEW Corporation, Canberra, April 2004, p35. View PDF: Part One Part Two Archived June 9, 2004, at the Wayback Machine
^ "Warragamba Dam auxiliary spillway". www.waternsw.com.au. Archived from the original on 2021-08-17. Retrieved 2021-06-09.

This article about a civil engineering topic is a stub. You can help Wikipedia by expanding it.

This article about a dam or floodgate is a stub. You can help Wikipedia by expanding it.

[1] Options for the Next ACT Water Source, ACTEW Corporation, Canberra, April 2004, p35. View PDF: Part One Part Two Archived June 9, 2004, at the Wayback Machine

[2] "Warragamba Dam auxiliary spillway". www.waternsw.com.au. Archived from the original on 2021-08-17. Retrieved 2021-06-09.

[1]