Tripoli–Cape Town Highway

Trans-African Highway 3
Trans-African Highway 3
Route information
Length	10,808 km (6,716 mi)
Major junctions
North end	TAH 1 in Tripoli, Libya
	TAH 5 and TAH 6 in Ndjamena, Chad ; TAH 8 in Yaoundé, Cameroon ; TAH 9 in Angola
South end	TAH 4 in Cape Town, South Africa
Location
Highway system
	Transport in ;

The Tripoli–Cape Town Highway or TAH 3 is Trans-African Highway 3 in the transcontinental road network being developed by the United Nations Economic Commission for Africa (UNECA), the African Development Bank (AfDB), and the African Union. The route has a length of 10,808 km (6,716 mi) and has the longest missing links and requires the most new road construction.

South Africa was not originally included in the route which was first planned in the Apartheid era, but it is now recognized that it would continue to Cape Town. It may still be referred to in documents as the Tripoli-Windhoek Highway because of this fact.

It is meant to be the second link between North and Southern Africa, with the Cairo-Cape Town Highway being the other route, passing through East Africa.

Route

The route passes through Libya, Chad, Cameroon, Central African Republic (CAR), Republic of the Congo (ROC), the western tip of the Democratic Republic of the Congo (DRC), Angola, Namibia and South Africa. Only national paved roads in Libya, Cameroon, Angola, Namibia and South Africa can be used to any extent. Currently only desert tracks run from southern Libya to the vicinity of Ndjamena, a distance of more than 2000 km, and no track of any kind exists between Salo, CAR and Ouésso, ROC.

Northern section

The Tripoli–Cape Town Highway is not a high priority in its northern section across the Sahara between Tripoli and Ndjamena, for which the Trans-Sahara Highway further west would probably find more usage and which provides an alternative north–south route. Libya is said to be more interested in road links to Niger which would connect with the Trans-Sahara Highway. Coupled with lawlessness and the potential for instability in the Libya-Chad border regions, the northern section is likely to be the last to be developed and may be a couple of decades away from completion.

Central section

It is the central section between northern Angola and Cameroon which is most needed because it would provide the first paved link between the West African and Southern African regions, and it would do the most to stimulate trade which currently has to go by air or sea. The central section is however a 'missing link', and the planned alignment between CAR and ROC would pass through some of the most remote and difficult terrain and rainforests of the Sangha River basin. This alignment has the potential for an enormous environmental impact on relatively untouched forest within a number of nature reserves.

An alternative alignment for the road has been proposed between Yaoundé, Cameroon and Brazzaville, ROC, which would do more to facilitate transport between the south and west of the continent, and which would probably have less of an environmental impact. It would run via Lambaréné (Gabon), and Dolisie (ROC), and this route has already been paved as far south as Ndendé, near the Congo border, meanwhile paving the rest is under way.^[1] From the south, traffic going to West Africa would branch off in Yaoundé onto the western section of the Lagos-Mombasa Highway, while traffic going east and north would share the paved road from Yaoundé to Garoua-Boulai on the Cameroon-CAR border. As well as being shorter for traffic between south and west, this alternative alignment has other advantages: it already carries a little international traffic, it runs through more populated and economically active areas, it adds Gabon (and its capital, Libreville, via a spur) to the network, and it passes very close to Equatorial Guinea (Rio Muni) and the Atlantic ports of Douala and Pointe-Noire. Furthermore, a greater proportion of this section is paved, and those sections which are gravel roads or earth tracks are important as national roads and so are higher priorities for paving.

Between Dolisié and Matadi an alternative mainly paved route is also available through Pointe-Noire and Cabinda, crossing the Congo River at the Matadi Bridge, instead of by ferry between Brazzaville and Kinshasa.

Southern section

The southern section between DRC and Cape Town on the other hand is an important regional road in the Southern African Development Community (SADC).

The Route follows south on the N1 highway in the DRC. It enters Angola through the EN140 and follows south through to the EN120 and enters the B1 in Namibia. The route continues to follow South and connects into South Africa using the N7 highway. The highway continues south until it interchanges with the N1 and M7 highways in Cape Town.

Paving of existing roads is required in northern Angola but from Ngage through Angola, Namibia's B1 road and South Africa's N7 highway to Cape Town is fully paved and is in a fair to good condition.

References

^ "Projet de la route Ndende-Dolisie et de facilitation du transport sur le corridor Libreville-Brazzaville – phase 1" [Ndende-Dolisie road project and transport facilitation on the Libreville-Brazzaville corridor – phase 1] (PDF) (in French). Communaute economique des etats de l’Afrique centrale.