Endestation {{{{{system}}} linjer|{{{linje}}}}} Endestation

Skabelondokumentation[vis] [redigér] [historik] [opfrisk]

Denne skabelon indeholder en eller flere valgbare parametre.

Skabelonen anvender en syntaks, som er yderst kompliceret og esoterisk. Forsøg ikke at ændre den, medmindre du er helt sikker på, at du forstår opbygningen og er indstillet på at udbedre alle eventuelle uheldige følger af, at ændringer giver et uventet resultat. Alle eksperimenter bør udføres i sandkassen, sandkasse-skabelonen, eller på din egen brugerside.

Brugsanvisning

Det efterfølgende er taget fra det engelske Wikipedia. En oversættelse til dansk efterlyses.

I forhold til den engelske udgave, hedder

rail = jernbane
line = linje
previous = forrige
next = næste
rows = rækker
hide = skjul
mid = midte
transfer = skifte
branch = gren
state = stat

Documentation

S-line must be encased within {{s-rail-start}} and {{end}}. The use of {{s-rail}} is highly recommended but not required.

See:

S-line has the following parameters:

Parameter	Description	Notes
system	The system to which the line belongs	This should correspond to an entry in Template:S-rail/lines
line	The name of the line	This should be obvious shorthand (e.g. Orange for Orange Line)
previous	The name of the previous station
next	The name of the next station
type	The left-hand line branch	Optional
type2	The right-hand line branch	Optional
note	Information about the left-hand line branch	Optional
note2	Information about the right-hand line branch	Optional
oneway1	Indicates that trains do not operate towards the Previous station	Optional
oneway2	Indicates that trains do not operate towards the Next station	Optional
rows1, hide1	Used to have the Previous Station box cover multiple lines. See below for details.	Optional
rows2, hide2	Used to have the Next Station box cover multiple lines. See below for details.	Optional
rowsmid, hidemid	Used to have the middle (Line) box cover multiple lines. See below for details.	Optional
transfer	Used to show lines available by direct transfer at an adjoining station. See below for details.	Optional
branch	Used to denote specific line branch information, in lieu of or in addition to the `type` parameters.	Optional
state1, state2	Allows the passing of an additional station parameter. Useful for disambiguation.	Optional

Making it work

S-line depends on sub-templates for the proper display of information. For an example, here are the templates necessary to properly display this box (a version of which is at Kalamazoo Transportation Center:

Foregående station		Amtrak		Næste station
Dowagiac mod Chicago		Wolverine		Battle Creek mod Pontiac, MI

First of all, here's the underlying code:

{{s-rail-start}}
{{s-rail|title=Amtrak}}
{{s-line|system=Amtrak|line=Wolverine|previous=Dowagiac|next=Battle Creek}}
{{end}}

Template:S-rail-start is a variant of the generic template {{s-start}} used to begin thousands of succession boxes. Template:S-rail is used to generate headings for each grouping of rail services in a box. Here we have only one, but some particularly large terminals may have three or four (see Union Station (Chicago) or 30th Street Station). S-rail uses the translation table at Template:S-rail/lines; if the entry is undefined, it simply links the text. Therefore, Amtrak produces Amtrak, while LUL gives London Underground.

You can see that S-line takes only parameters–no linking necessary! S-line accomplishes this through two assumptions: (1) groups of articles on train stations are named in a predictable manner; (2) redirects are cheap. For S-line to produce the table above five separate templates were defined. Before discussing them, however, let's review the parameters:

SYSTEM: The company or grouping to which the line belongs. This is case-sensitive and must be consistent. In this case, the value is Amtrak.
LINE: The line name. This is also case-sensitive and must be consistent throughout. Here, we're describing the Wolverine.
PREVIOUS and NEXT: The names of the previous and next stations on the line. Current convention suggests West/East Left/Right, followed by North/South, but your mileage may vary. Whenever possible, a succession boxes should make geographic sense (i.e. don't have one line running west-east and the other east-west).

You need templates to define the following things: the formatting/linking of the line, the formatting/linking of the previous and next stations, the display of the line's colour, and the display of the appropriate termini–all automatic.

Line

[[Template:{{{SYSTEM}}} lines]] (Template:Amtrak lines)

This template carries a translation table for the formatting/linking of the line. The template receives one parameter, {{{1}}} from S-line. With systems that have unusual or non-uniform naming, like Amtrak, it may be necessary to have a test case for every line. The relevant line from Template:Amtrak lines is this:

| Wolverine=''[[Wolverine (passenger train)|Wolverine]]''

This links to the article on the Wolverine and italicizes the article, appropriate for a named train. This means if the article ever moves, you need only to update switch statement, not individual articles. When a system has uniform naming, you may be able to get away with a default case and only one or two exceptions, as in Template:LUL lines:

{{#switch:{{{1}}}
 | #default=[[{{{1}}} Line]]
}}

Station

[[Template:{{{SYSTEM}}} stations]] (Template:Amtrak stations)

This template carries a translation table for the formatting/linking of the line. The template receives two parameters from S-line, {{{station}}} and {{{line}}}, although use of the latter is not often necessary. Station will be either the PREVIOUS or NEXT parameter; both are handled the same way behind the scenes. The easiest way to start the station template is with the default case that reflects how articles on system stations are named. With Amtrak, it's done this way:

 | #default=[[{{{station}}} (Amtrak station)|{{{station}}}]]

Therefore, "Dowagiac" produces [[Dowagiac (Amtrak station)|Dowagiac]], all linked and ready to go.

Colour

[[Template:{{{SYSTEM}}} color]] (Template:Amtrak color)

Note that colour is spelled the American way in the template; the creator apologizes in advance and it's probably not worth the hassle to change it at this stage. This template is designed the same way as the others except that a default case is rare--lines within a system tend to have a different colour. Amtrak is an important exception, and doesn't even have a switch statement: the template consists only of the hex code: 004670. The pound sign is included within s-line so it isn't necessary. This also forces the use of hex codes; no nouns are permitted (e.g. red, white). The template takes one parameter, {{{1}}}. A good example is found here at Template:SEPTA color:

{{#switch:{{{1}}}
 | Broad Street=F58735
 | Market-Frankford=0081C4
 | Subway-Surface=5D9842
 | Route 100=993F96
 | Route 101
 | Route 102=AF5F18
 | R1=F9EF02
 | R2=A80058
 | R3=F9812A
 | R5=0255A1
 | R6=049471
 | R7=E63641
 | R8=CF731E
}}

Termini

[[:Template:S-line/{{{SYSTEM}}} left/{{{LINE}}}]] (Template:S-line/Amtrak left/Wolverine)

[[:Template:S-line/{{{SYSTEM}}} right/{{{LINE}}}]] (Template:S-line/Amtrak right/Wolverine)

These are the all-important templates which produce the "towards..." part of the templates. They can also get pretty tricky depending on the setup. The Wolverine is an easy example. It runs end-to-end from Chicago, Illinois to Pontiac, Michigan. Therefore, the "left" (westbound) template contains "Chicago" while the "right" (eastbound) template contains "Pontiac". These names are plugged in to the STATION template just as NEXT and PREVIOUS were, with the results that you can see above. A feature of S-line is that if it detects that the next station is the name as the terminus, it will display a note to that effect instead of the destination. Hence,

{{s-rail-start}}
{{s-rail|title=Amtrak}}
{{s-line|system=Amtrak|line=Wolverine|previous=Chicago|next=Battle Creek}}
{{end}}

produces:

Foregående station		Amtrak		Næste station
Chicago Endestation		Wolverine		Battle Creek mod Pontiac, MI

Now, let's say we've got a more complicated example, like the Lake Shore Limited, which runs from Chicago east to either Boston or New York. The Limited's "left" template is still a simple line of text–Chicago–but the "right" template needs a switch statement. The left and right templates receive one parameter, {{{type}}}, from s-line, which tells them which termini to return. Here's the Limited's "right" template: {{#switch:{{{type}}} |Both=New York or Boston South |New York=New York |Boston=Boston South }} This allows three eastbound destinations: New York, Boston, or both if the train hasn't reached the junction point yet. A default statement is acceptable here if it is true for disproportionate length of the line. In order to make this work properly, you have to define the concept of "New York or Boston South" in the STATION template, like so:

 | New York or Boston South=[[Pennsylvania Station (New York)|New York]] or [[Boston South (Amtrak station)|Boston South]]

Here's a hypothetical example of this at work:

{{s-rail-start}}
{{s-rail|title=Amtrak}}
{{s-line|system=Amtrak|line=Lake Shore Limited|previous=Chicago|next=Battle Creek|type2=Both}}
{{end}}

Foregående station		Amtrak		Næste station
Chicago Endestation		Lake Shore Limited		Battle Creek mod New York City or Boston South Station

One Way Operation

For rail lines that operate in only one direction (such as going around a loop), the oneway1 or oneway2 parameters are used, to indicate that the Previous or Next station, respectively, does not have service going towards it. When these parameters are present with any non-null value, the toward [Terminal] line is replaced with One-way Operation. For example, for a CTA station in the Chicago Loop:

{{s-rail-start}}
{{s-rail|title=CTA}}
{{s-line|system=CTA|line=Brown|previous=Clark/Lake|next=Randolph/Wabash|type=Kimball|oneway2=true}}
{{s-line|system=CTA|line=Green|previous=Clark/Lake|next=Randolph/Wabash|type2=Both}}
{{s-line|system=CTA|line=Orange|previous=Clark/Lake|next=Randolph/Wabash|oneway1=true|type2=Midway|rows1=3}}
{{s-line|system=CTA|line=Purple|previous=Clark/Lake|next=Randolph/Wabash|oneway1=true|type2=Linden|hide1=true}}
{{s-line|system=CTA|line=Pink|previous=Clark/Lake|next=Randolph/Wabash|oneway1=true|type2=54|hide1=true}}
{{end}}

Produces the box:

Foregående station	Chicago "L"	Næste station
Clark/Lake mod Kimball	Harlem/Lake	Randolph/Wabash Kun kørsel i én retning
Clark/Lake mod Harlem/Lake	Harlem/Lake	Randolph/Wabash mod Ashland/63rd or Cottage Grove
Clark/Lake Kun kørsel i én retning	Harlem/Lake	Randolph/Wabash mod Midway
	Harlem/Lake	Randolph/Wabash mod Linden
	Harlem/Lake	Randolph/Wabash mod 54th/Cermak

Parallel Lines

For lines that operate on the same tracks and serve the same next station and final terminal, the rows1, rows2, hide1, and hide2 optional parameters can be used to have the Previous (the 1s) or Next (the 2s) Station boxes cover more then one line. The rows parameters specify how many lines the station should cover, while the hide parameters ensure that the table formatting remains intact. The two parameters must be used together, with hide specified for every line that is being covered by the first line. An example of this use can be seen in the above CTA box. Note that, in the above CTA example, the previous and oneway1 parameters could have been omitted from the Purple and Pink line entries, but were left in for consistency's sake.

Transfers

The transfer parameter makes it possible to show within the box lines available at a different station with which there's a direct transfer from the current station. This snippet is taken from City Hall (SEPTA station). The Market-Frankford line does not actually serve the station itself, but there's a free transfer from that line at 15th Street to services at the City Hall station:

{{s-rail-start}}
{{s-rail|title=SEPTA}}
{{s-line|system=SEPTA|line=Broad Street|branch=Local|previous=Walnut–Locust|next=Race–Vine|rows2=2}}
{{s-line|system=SEPTA|line=Broad Street|branch=Express|previous=Walnut–Locust|next=Race–Vine|hide2=yes}}
{{s-line|system=SEPTA|line=Market-Frankford|previous=30th Street|next=13th Street|transfer=15th Street}}
{{end}}

Produces:

Foregående station	SEPTA	Næste station
Walnut–Locust mod	Broad Street Line Local	Race–Vine mod Fern Rock
Walnut–Locust mod	Broad Street Line Express	Race–Vine mod Fern Rock
30th Street mod 69th Street	Market–Frankford Line Skift ved: 15th Street	13th Street mod Frankford

Grene

The gren (branch) parameter can be used to describe a subset of a line. In the example below, the branch parameter designates four different parts of the MBTA Green Line. When passed to the left and right termini templates, the branch and line parameters identify destinations. Additionally, the branch name is displayed beneath the line name.

Optionally, [[Template:{{{SYSTEM}}} lines/branches]] may be defined, which allows the linking of the branch parameter.

In this example below, the branch template (Template:MBTA lines/branches) is defined, allowing branch linking. Additionally, left and right termini are returned based on the passed branch parameter:

{{s-rail-start}}
{{s-rail|title=MBTA}}
{{s-line|system=MBTA|line=Green|gren="B" Branch|previous=Copley|next=Boylston|rows2=2}}
{{s-line|system=MBTA|line=Green|gren="D" Branch|previous=Copley|next=|hide2=yes}}
{{s-line|system=MBTA|line=Green|gren="C" Branch|previous=Copley|next=Boylston}}
{{s-line|system=MBTA|line=Green|gren="E" Branch|previous=Copley|next=Boylston}}
{{end}}

Foregående station	MBTA	Næste station
Copley mod	Green Line	Boylston mod
Copley mod	Green Line	Boylston mod
Copley mod	Green Line	Boylston mod
Copley mod	Green Line	Boylston mod

Styles

[[Template:{{{SYSTEM}}} style]] (Template:Amtrak style)

The style template allows the modification, at a system level, of display parameters for inter-related templates, including Template:Infobox Station.

Parameter	Description	Notes
lang	Which version of English to output display in. Specify GB for British; the default is US.	Optional; S-line only
name_cell	Formatting for the `{{{name}}}` parameter box	Optional; Infobox Station only
name_format	Formatting for the `{{{name}}}` parameter itself	Optional; Infobox Station only
showterm	A "No" value suppresses the display of termini information	Optional; S-line only
stop_noun	Type of stop (e.g. station, tram stop); default is "station"	Optional; S-rail only
thcolor	Font color for table headings	Optional; Infobox Station only
thbgcolor	Background color for table headings	Optional; Infobox Station only

Dokumentationen ovenfor er transkluderet fra Skabelon:S-linje/doc.
Brugere kan eksperimentere i denne skabelons undersider sandkasse og testcases .
Tilføj venligst kategorier til /dok-undersiden. Undersider til denne skabelon.